Belt Tensioner
Show/hide table
 | |
| Illustration 1 | g02291813 |
Typical example | |
(1) Tighten the bolt to the following torque. ... 55 N·m (41 lb ft)
Note: To install the belt tensioner, refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.
Caterpillar Information System:
3512C HD and 3516C HD IPP Rental Power Modules ECM Software - Install
3516B Generator Set Engines with Dynamic Gas Blending Engine Top Speed Is Not Obtained
C280 Marine Engines Fuel Consumption Is Excessive
3516B Generator Set Engines with Dynamic Gas Blending Oil Consumption Is Excessive
3516B Generator Set Engines with Dynamic Gas Blending Oil Contains Fuel
3516B Generator Set Engines with Dynamic Gas Blending Oil Contains Coolant
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Prelubrication Pump Problem
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Injector Solenoid - Test
Cat® Command For Hauling E1485
Cat® Command For Hauling E1484
Cat® Command For Hauling E1483
Cat® Command For Hauling E1482
Turbocharger Water Vent Lines on C175-20 60 Hz Generator Sets{1052, 1380} Turbocharger Water Vent Lines on C175-20 60 Hz Generator Sets{1052, 1380}
C4.4 Marine Generator Set Crankshaft Pulley
390F Excavator Machine Systems Fan Reversing Valve - Disassemble
XQC1200 and XQC1600 Power Modules Electric Starting Motor - Remove and Install
C9 Generator Set Maintenance Interval Schedule - Prime Power
826K Landfill Compactor DEF Manifold Filters - Replace - Emission Related Component
XQC1200 and XQC1600 Power Modules Electronic Control Module (Engine) - Remove and Install
390F Excavator Machine Systems Fan Reversing Valve - Assemble
XQC1200 and XQC1600 Power Modules Fuel Priming Pump - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Prelubrication - Test
C4.4 Marine Generator Set Auxiliary Water Pump
G3306B Generator Sets Cold Weather Starting