Cylinder Head Valves
Show/hide table
图 1 | g03538778 |
Show/hide table
356-2070 缸盖总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 12     | 252-7802 进气门     | 安装前在气门杆上涂抹清洁的发动机机油。 尺寸 (B) 为 9.441 ± 0.008 mm (0.3717 ± 0.0003 in) 表面角度 (D) 为 60.75 ± 0.25 度 气门头直径 (F) 为 44.50 ± 0.13 mm (1.752 ± 0.005 in)。     |
2     | 12     | 248-1467 排气门     | 安装前在气门杆上涂抹清洁的发动机机油。 尺寸 (C) 为 9.441 ± 0.008 mm (0.3717 ± 0.0003 in) 表面角度 (E) 为 45.75 ± 0.25 度 气门头直径 (G) 为 41.50 ± 0.13 mm (1.634 ± 0.005 in)     |
3     | 24     | 224-4441 弹簧     | 试验力下的长度为 50.47 mm (1.987 in) 试验力为 160 ± 13 N (36 ± 3 lb) 试验后的自由长度约为 64.1 mm (2.52 in)     |
4     | 24     | 332-2152 弹簧     | 试验力下的长度为 52.95 mm (2.085 in) 试验力为 320 ± 31 N (72 ± 7 lb) 试验后的自由长度约为 62.7 mm (2.47 in)     |
5     | 24     | 268-2953 阀导管     | 安装前在缸孔上涂抹清洁的发动机机油。 装配前的孔径为 9.508 ± 0.013 mm (0.3743 ± 0.0005 inch) 从缸盖表面到气门导管座的安装高度 (A) 为 20.0 ± 0.5 mm (0.79 ± 0.02 in)     |
6     | 12     | 260-4855 气门座镶圈     | 插入角度为 29.75 ± 0.25 度 外径为 45.525 ± 0.013 mm (1.7923 ± 0.0005 in) 缸盖孔为 45.461 ± 0.015 mm (1.7898 ± 0.0006 in)     |
7     | 12     | 224-1270 气门座镶圈     | 插入角度为 44.75 ± 0.25 度 外径为 42.390 ± 0.015 mm (1.6689 ± 0.0006 in) 缸盖孔为 42.320 ± 0.015 mm (1.6661 ± 0.0006 in)     |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C9.3 Tier 4 Final Engines Belt Tensioner
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C11 and C13 Engines Valve Mechanism Cover
C11 and C13 Engines Valve Rocker Arm
C11 and C13 Engines Valve Rocker Arm
3500E Marine Engines Fluid Recommendations
Procedure for Replacing the Turbine Inlet Bellows on Certain C175 Engines {1061} Procedure for Replacing the Turbine Inlet Bellows on Certain C175 Engines {1061}
C13, C15, and C18 Tier 4 Final Engines Air Lines
C11 and C13 Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Relay (ARD Nozzle Heater)
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C11 and C13 Engines Engine Oil Pan
G3600 A4 Engines Air Starting Motor Problem
G3600 A4 Engines Engine Overspeeds
G3600 A4 Engines Intake Manifold Air Temperature Is High
G3600 A4 Engines Inlet Air Is Restricted