Fan Drive - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the fan drive.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1). Remove adapter (2) and the O-ring seal (not shown).
Show/hide table
Illustration 2 g03411754 - Remove bolts (5) and washer (4).
- Remove pulley (3) from bracket assembly (6). If necessary, remove pressure relief fitting (7) from bracket assembly (6).
Show/hide table
Illustration 3 g03411755 - Remove spacer (8) from pulley (3).
Show/hide table
Illustration 4 g03411756 - Use Tooling (A) to remove bearing (9) and spacer (11) from pulley (3). If necessary, remove grease fitting (10) from pulley (3).
Show/hide table
Illustration 5 g03411757 - Use Tooling (A) to remove bearing (13) and lip seal (12) from pulley (3).
Show/hide table
Illustration 1 | g03411753 |
Caterpillar Information System:
C9.3 Industrial Engine Product Lifting
EMCPll+ Software Not Compatible With Certain G3400 Engines{4490} EMCPll+ Software Not Compatible With Certain G3400 Engines{4490}
C9.3 Industrial Engine Plate Locations and Film Locations
C13 Generator Set Engine Fan Drive - Remove and Install
3516C Locomotive Engines Selective Catalytic Reduction Component Location
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Engine Overspeeds
C3.4B Industrial Engine After Starting Engine
C13 Generator Set Engine Fan Guard - Remove and Install
C13, C15, and C18 Generator Set Engines Turbocharger Oil Lines
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
3516C Locomotive Engines Selective Catalytic Reduction System Overview
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
C13 Generator Set Engine Fan Drive - Assemble
C7.1 Engines Fuel Pressure Sensor - Remove and Install
371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703} 371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703}
C27 and C32 Generator Sets Product Description
2015/08/19 An Improved Seat Belt Group is Now Available for 311 through 390 Excavators {7327}
2013/07/30 New Service Replacement Stator Part Numbers for Certain XQ60, XQ100, and XQ175 Generator Sets are Now Available {4453}
3516C Marine Engines Water Lines
C3.4B Industrial Engine Fuel Related Components in Cold Weather
C13 Generator Set Engine Fan - Remove and Install
3516C Marine Engines Engine Oil Lines
UPS 750 Uninterruptible Power Supply DC Bus Capacitor - Replace
2013/08/30 New Software and Low Pressure Fuel System Are Used in Certain C175 Engines {1250, 1901, 1902}