2013/08/09 Caterpillar


A New Assembly Procedure at the Factory Is Now Used on Certain C18 Marine Engines with a Sea Water Pump and a Bronze Impeller {1000, 1361}

Usage:

C18 DTP
Engine:
C18 (S/N: TNA1-UP; GTB1-UP; T2R1-UP; GEX1-UP)
Generator Set:
C18 MARINE GS (S/N: GBM1-UP)
Marine Engine:
C18 MARINE (S/N: JHL1-UP; DTP1-UP; GES1-UP)
C18 MARINE ENG (S/N: T2P1-UP)
Engine News SEBD9888, 6 August 2013, "A New Assembly Procedure at the Factory Is Now Used on Certain C18 Marine Engines with a Sea Water Pump and a Bronze Impeller ". Disregard this article. Refer to the article that follows. The effectivity has changed.

Description of Change: The new procedure at the factory prevents premature seal failures.

Adaptable To: The procedural change is effective at the factory with the engine serial numbers that are listed in the table.

Table 1
Effective Serial Numbers at the Factory    
S/N:GBM01304-UP    
S/N:GES01255-UP    
S/N:GTB00112-UP    
S/N:GEX00111-UP    
S/N:JHL00115-UP    
S/N:T2P02711-UP    
S/N:T2R00131-UP    
S/N:TNA00156-UP    
S/N:DTP00107-UP    

Caterpillar Information System:

2013/07/24 A New Harness Is Used on Certain C280 Engines {1408}
2013/10/09 New Fuel Filter Wiring Harness Routing Used on Certain C175 Generator Set Engines {1408}
2013/07/24 Improved Engine Harness Assemblies Are Used on Certain 3512C and 3516C Engines {1408}
320D2 Forest Machine Machine System Specifications Check Valve (Return Lines)
C13, C15, and C18 Generator Set Engines Fan Drive
C32 Marine Engine Turbocharger Turbine Temperature Is High
2013/07/25 Improved Air Inlet Heater Relays Are Now Used On Certain C7 and C9 Industrial Engines {1090, 1408}
349F and 352F Excavators Machine System Pilot Valve (Travel)
C15 and C18 Industrial Engines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
C15 and C18 Industrial Engines Turbocharger - Remove and Install
C15 and C18 Industrial Engines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
C13, C15, and C18 Generator Set Engines Fuel Priming Pump and Secondary Fuel Filter
C13, C15, and C18 Generator Set Engines Exhaust Manifold Shield
C13, C15, and C18 Generator Set Engines Electronic Control Wiring Group
374F Excavator Hydraulic System Stick Drift Reduction Valve
3516C Locomotive Engines Selective Catalytic Reduction Dosing Control System Operation
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
3516C Locomotive Engines Selective Catalytic Reduction System Overview
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
C13, C15, and C18 Generator Set Engines Turbocharger Oil Lines
C13 Generator Set Engine Fan Guard - Remove and Install
C3.4B Industrial Engine After Starting Engine
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Engine Overspeeds
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.