2013/10/09 Caterpillar


New Fuel Filter Wiring Harness Routing Used on Certain C175 Generator Set Engines {1408}

Usage:

C175-16 WYB
Electric Power Generation:
C175-16 GEN SET (S/N: WYB1-UP)

Description of Change: The new routing arrangement improves the routing for the fuel filter wiring harness to the fuel filter base.

Adaptable To: The parts needed to update the routing of the fuel filter harness are listed in Table 1. The effective serial numbers are listed below :

  • WYB01402-UP

ReferenceRefer to the 334-5894 Engine Sensor Gp and 331-3524 Primary Fuel Filter Gp drawings or the Illustrations below to aid in installing the new parts.

Note: The 334-5894 Engine Sensor Gp and 331-3524 Primary Fuel Filter Gp drawings are packaged with the new parts.




Illustration 1g03475022

(1) 335-1647 Support As

(2) Three 7K-1181 Cable Strap

(3) 334-5886 Engine Harness As

(4) 8T-0643 Bolt

(5) 132-5789 Clip




Illustration 2g03475036

(2) 7K-1181 Cable Strap

(6) 4P-7581 Clip

(7) Two 8T-4121 Hard Washer

(8) 8T-4133 Nut

(9) 8T-4195 Bolt

Table 1
Part Number     Part Description     Qty    
132-5789     Clip     1    
334-5886     Engine Harness As     1    
335-1647     Support As     1    
4P-7581     Clip     1    
7K-1181     Cable Strap     4    
8T-0643     Bolt     1    
8T-4121     Hard Washer     2    
8T-4133     Nut     1    
8T-4195     Bolt     1    

Caterpillar Information System:

2013/07/24 Improved Engine Harness Assemblies Are Used on Certain 3512C and 3516C Engines {1408}
320D2 Forest Machine Machine System Specifications Check Valve (Return Lines)
C13, C15, and C18 Generator Set Engines Fan Drive
C32 Marine Engine Turbocharger Turbine Temperature Is High
2013/07/25 Improved Air Inlet Heater Relays Are Now Used On Certain C7 and C9 Industrial Engines {1090, 1408}
349F and 352F Excavators Machine System Pilot Valve (Travel)
C15 and C18 Industrial Engines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
C15 and C18 Industrial Engines Turbocharger - Remove and Install
C15 and C18 Industrial Engines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
349F and 352F Excavators Hydraulic System Stick Drift Reduction Valve
349F and 352F Excavators Machine System Boom Drift Reduction Valve
2013/07/24 A New Harness Is Used on Certain C280 Engines {1408}
2013/08/09 A New Assembly Procedure at the Factory Is Now Used on Certain C18 Marine Engines with a Sea Water Pump and a Bronze Impeller {1000, 1361}
C13, C15, and C18 Generator Set Engines Fuel Priming Pump and Secondary Fuel Filter
C13, C15, and C18 Generator Set Engines Exhaust Manifold Shield
C13, C15, and C18 Generator Set Engines Electronic Control Wiring Group
374F Excavator Hydraulic System Stick Drift Reduction Valve
3516C Locomotive Engines Selective Catalytic Reduction Dosing Control System Operation
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
3516C Locomotive Engines Selective Catalytic Reduction System Overview
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
C13, C15, and C18 Generator Set Engines Turbocharger Oil Lines
C13 Generator Set Engine Fan Guard - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.