320D2 Forest Machine Machine System Specifications Caterpillar


Check Valve (Return Lines)

Usage:

320D2 FM BW2


Illustration 1g03731980

Table 1
Specification for 369-8420 Check Valve Gp 
Item  Qty  Part  Specification description 
Apply Threebond 1305N.
Torque to 35 ± 5 N·m (26 ± 4 lb ft)
Tighten plug to 150 ± 15 N·m (111 ± 11 lb ft)
9S-6130 Plug  Torque to 150 ± 15 N·m (111 ± 11 lb ft)
When check valve group is installed, use washer.
Tighten mounting bolt to 50 ± 10 N·m (37 ± 7 lb ft)
Apply Threebond 1305N.
Torque to 9 ± 1 N·m (80 ± 9 lb in)
Apply Threebond 1305N to threads.
Tighten nut to 16 ± 2 N·m (142 ± 18 lb in)
190-7826 Plug  Torque to 150 ± 15 N·m (111 ± 11 lb ft)

Caterpillar Information System:

C13, C15, and C18 Generator Set Engines Fan Drive
C32 Marine Engine Turbocharger Turbine Temperature Is High
2013/07/25 Improved Air Inlet Heater Relays Are Now Used On Certain C7 and C9 Industrial Engines {1090, 1408}
349F and 352F Excavators Machine System Pilot Valve (Travel)
C15 and C18 Industrial Engines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
C15 and C18 Industrial Engines Turbocharger - Remove and Install
C15 and C18 Industrial Engines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
349F and 352F Excavators Hydraulic System Stick Drift Reduction Valve
349F and 352F Excavators Machine System Boom Drift Reduction Valve
3512E Petroleum Engine NOx Reduction System (NRS) - Test
349F and 352F Excavators Machine System Main Hydraulic Pump
2013/07/24 Improved Engine Harness Assemblies Are Used on Certain 3512C and 3516C Engines {1408}
2013/10/09 New Fuel Filter Wiring Harness Routing Used on Certain C175 Generator Set Engines {1408}
2013/07/24 A New Harness Is Used on Certain C280 Engines {1408}
2013/08/09 A New Assembly Procedure at the Factory Is Now Used on Certain C18 Marine Engines with a Sea Water Pump and a Bronze Impeller {1000, 1361}
C13, C15, and C18 Generator Set Engines Fuel Priming Pump and Secondary Fuel Filter
C13, C15, and C18 Generator Set Engines Exhaust Manifold Shield
C13, C15, and C18 Generator Set Engines Electronic Control Wiring Group
374F Excavator Hydraulic System Stick Drift Reduction Valve
3516C Locomotive Engines Selective Catalytic Reduction Dosing Control System Operation
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
3516C Locomotive Engines Selective Catalytic Reduction System Overview
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.