Crosshead - Disassemble
Disassemble Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 395-1098     | Lifting Eye     | 2     |
B     | 1P-0510     | Driver Group     | 1     |
Start By:
- Remove the crosshead.
Show/hide table
Approximate weight of pony rod (2)     | |
Sales Model     | Approximate Weight     |
WS273 XD WSP273     |
27 kg (60 lb)     |
WS305 XD WSP305     |
27 kg (60 lb)     |
- Use a suitable lifting device to remove pony rod (2) . Refer to Table 2 for the approximate weight of pony rod (2) . Remove bolts (1) and remove pony rod (2) .
Show/hide table
Illustration 1 | g03398553 |
- Remove set screw (3) from crosshead (4) .
Show/hide table
Table 3 Approximate weight of crosshead (4)     Sales Model     Approximate Weight     WS273 XD
WSP273    
56 kg (123 lb)    WS305 XD
WSP305    
56 kg (123 lb)    
Show/hide table
Illustration 2 | g03398504 |
- Attach Tooling (A) to crosshead (4) . Use a suitable lifting device to remove crosshead (4) . Refer to Table 3 for the approximate weight of crosshead (4) .
Show/hide table
Illustration 3 | g03398558 |
Show/hide table
Illustration 4 | g03398564 |
- Put an Identification Mark (X) on pin (5) and crosshead (4) for installation purposes. Remove pin (5) and crosshead (4) .
- Flip crosshead (4) over. Remove bolts (6) and thrust bearing (7) .
Show/hide table
Table 4 Approximate weight of connecting rod (9)     Sales Model     Approximate Weight     WS273 XD
WSP273    
70 kg (154 lb)    WS305 XD
WSP305    
70 kg (154 lb)    
Show/hide table
Illustration 5 | g03398573 |
- Use a suitable lifting device to lift connecting rod (9) . Refer to Table 2 for the approximate weight of connecting rod (9) . Use Tooling (B) and a suitable press to remove bushing (8) . Remove bushing (8) .
Show/hide table
Illustration 6 | g03398595 |
Caterpillar Information System:
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Assemble
Troubleshooting Procedure for the Failure of All Refueling Pumps {1295} Troubleshooting Procedure for the Failure of All Refueling Pumps {1295}
C15 and C18 Industrial Engines Air Control Valve - Remove and Install
2014/07/18 A New Auxiliary Water Pump Group is Used in Certain CG137 and G3400 Engines {1371}
C15 and C18 Industrial Engines Exhaust Cooler (NRS) - Remove and Install
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove and Install
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Sensor Calibration Required - Test
2013/09/25 New All Metal Fuel and Water Separators Are Used For Certain Machines {1261, 1263}
3516E Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
2013/07/01 New Jacket Water Heating Element Used in Certain C9 Generator Set Engines {1383}
C175-16 Locomotive Engine Engine Coolant Temperature Sensor
325D and 329D Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
G3500B Engines Engine Shutdown Occurs Intermittently
3516C Petroleum Engines Engine Oil Filter Housing - Disassemble
3500B Locomotive Engines Belts - Inspect/Adjust/Replace
C15 and C18 Industrial Engines Exhaust Elbow - Remove and Install
C15 and C18 Industrial Engines Air Inlet Elbow - Remove and Install
C32 Petroleum Engines Product Description
C32 Petroleum Engines Refill Capacities
C32 Petroleum Engines Air Compressor - Check
419-9827 C175 Damper Lifting Device{0374, 0599, 0629, 0632, 0700, 0701, 1205} 419-9827 C175 Damper Lifting Device{0374, 0599, 0629, 0632, 0700, 0701, 1205}
C15 and C18 Industrial Engines Water Pump - Remove and Install