New Jacket Water Heating Element Used in Certain C9 Generator Set Engines {1383}
- Generator Set:
- C9 GEN SET (S/N: C9E1-UP; NBP1-UP)
Description of Change: The new jacket water heating element cold pin is lengthened and reshaped. This change allows for lower operating temperatures for the o-ring that seals the coolant from the electrical element.
Adaptable To:
Show/hide table
Illustration 1 | g03397519 |
258-6844 Coolant Heater |
Show/hide table
Illustration 2 | g03401801 |
(1) New 258-6844 Coolant Heater (2) Previous 258-6844 Coolant Heater |
Illustration 2 shows the difference between the new coolant heater (1) and the previous coolant heater (2). The 258-6844 Coolant Heater part has not changed. The part is identified by the "S" after the date code on the part label. Table 1 contains the effective serial numbers.
Show/hide table
Sales Model     | Effective Serial Number     |
---|---|
C9     | S/N:C9E03083-UP     |
S/N:NBP00374-UP |
Caterpillar Information System:
SPF343 and SPF343C Trailer Mounted Pumpers Fluid Recommendations
C13 Generator Set Refill Capacities
3512C Oil Well Service Engines Monitoring System
3512C Oil Well Service Engines Product Description
349F and 352F Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Calibrate - Boom Down Regeneration
C13 Generator Set Product Description
Well Service Pumps Product Storage
2013/07/30 New Water Lines Are Available for the 355-4160 Throttle Gp on Certain CG137 Engines {1265, 1266}
2013/06/26 Improved Ground Straps Have Been Added to the Diesel Exhaust Fluid Control Cabinet {1091, 1408}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Reference Material
2013/09/16 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512C Petroleum Engines {1250, 1280}
2013/06/26 A New Precooler Hose Is Now Used on Certain C18 Tier 4 Interim Industrial Engines {105P, 7554}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
3516E Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
2013/09/25 New All Metal Fuel and Water Separators Are Used For Certain Machines {1261, 1263}
3512E Tier 4 Final Engines for Land Electric Drilling Sensor Calibration Required - Test
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove and Install
C15 and C18 Industrial Engines Exhaust Cooler (NRS) - Remove and Install
2014/07/18 A New Auxiliary Water Pump Group is Used in Certain CG137 and G3400 Engines {1371}
C15 and C18 Industrial Engines Air Control Valve - Remove and Install
Troubleshooting Procedure for the Failure of All Refueling Pumps {1295} Troubleshooting Procedure for the Failure of All Refueling Pumps {1295}
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Assemble
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Disassemble