New Water Lines Are Available for the 355-4160 Throttle Gp on Certain CG137 Engines {1265, 1266}
- Engine:
- CG137-08 (S/N: WWF1-UP)
- CG137-12 (S/N: WRX1-UP)
The throttle used on CG137 engines are overheating. The throttle is equipped with ports for water cooling. The throttle is cooled by the separate circuit aftercooler system.
Refer to Special Instructions, REHS7879, "Installation of Coolant Lines for the Throttle Actuator on CG137 Engines" for more details.
The new parts needed for installation are listed in Table 1.
Show/hide table
| Qty | New Part |
|---|---|
| 1 | 0L-2070 Bolt |
| 3 | 0S-1594 Bolt |
| 1 | 2T-2305 Elbow |
| 2 | 5M-2894 Hard Washer |
| 1 | 5P-9297 Clip |
| 1 | 6V-3265 Clip |
| 5 | 6V-8397 O-Ring Seal |
| 1 | 6V-9850 Elbow |
| 1 | 8C-6868 Connector |
| 2 | 9S-8752 Full Nut |
| 1 | 032-1267 Connector |
| 1 | 032-1268 Connector |
| 1 | 119-5708 Clip |
| 1 | 173-2087 Spacer |
| 2 | 205-3931 Seal |
| 1 | 206-5017 Spacer |
| 1 | 337-8842 Rotary Actuator |
| 1 | 377-8842 Tube As |
| 2 | 398-5646 Connector |
| 1 | 422-9083 Tube As |
| 1 | 422-9086 Tube As |
| 1 | 422-9087 Tube As |
| 1 | 422-9089 Tube As |
| 1 | 422-9090 Tube As |
| 1 | 422-9091 Tube As |
| 1 | 425-8515 Bracket |
| 1 | 436-5662 Engine Ratings Electronic Software Gp |
Effectivity is list in Table 2.
Show/hide table
| Effectivity |
|---|
| S/N:WRX00123-UP |
| S/N:WWF00111-UP |
Caterpillar Information System:
2013/06/26 Improved Ground Straps Have Been Added to the Diesel Exhaust Fluid Control Cabinet {1091, 1408}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Reference Material
2013/09/16 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512C Petroleum Engines {1250, 1280}
2013/06/26 A New Precooler Hose Is Now Used on Certain C18 Tier 4 Interim Industrial Engines {105P, 7554}
2013/06/20 Additional Support for the Bucket Circuit Tube Assembly is Available for Certain Excavators and Mobile Hydraulic Power Units {5057}
3512C Oil Well Service Engines Starting the Engine
C4.4 Industrial Engine Safety Messages
2013/06/18 Proper Pinout Locations on Certain Atlas Copco Industrial 3512C Engines {1408}
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Power Take Off equipped
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install - With Remote Mounted Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install - Remote Mounted
794 AC Off-Highway Truck Windows - Clean
Well Service Pumps Product Storage
C13 Generator Set Product Description
349F and 352F Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Calibrate - Boom Down Regeneration
3512C Oil Well Service Engines Product Description
3512C Oil Well Service Engines Monitoring System
C13 Generator Set Refill Capacities
SPF343 and SPF343C Trailer Mounted Pumpers Fluid Recommendations
2013/07/01 New Jacket Water Heating Element Used in Certain C9 Generator Set Engines {1383}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
3516E Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
2013/09/25 New All Metal Fuel and Water Separators Are Used For Certain Machines {1261, 1263}
3512E Tier 4 Final Engines for Land Electric Drilling Sensor Calibration Required - Test