New Software Is Now Used on Certain C18 Auxiliary and Generator Set Engines {1920}
- Generator Set:
- C18 (S/N: STM1-UP; CYN1-UP; GEN1-UP; MGS1-UP)
Description of Change: The low oil pressure shutdown fault occurs from 100 rpm to 0 rpm as the engine is shutting down.
The new software also has 0 kPa for the oil pressure map for engine speeds below 500 RPM during engine shutdown and allows the customer to change the shutdown time delay to a range of 2 to 8 seconds.
Note: The setting mentioned above is located in the Programmable Monitoring System (PMS) in Caterpillar Electronic Technician (Cat® ET).
Adaptable To: The new software replaces the former software in the above engines. The new software is adaptable to the above engines back to first production.
The new software and former software are listed in Table 1.
Show/hide table
New Part     | Former Part     |
---|---|
433-9245 Engine Ratings Electronic Software Gp     | 308-7241 Engine Ratings Electronic Software Gp     |
437-3647 Engine Ratings Electronic Software Gp     | 314-5421 Engine Ratings Electronic Software Gp     |
437-3648 Engine Ratings Electronic Software Gp     | 314-5422 Engine Ratings Electronic Software Gp     |
440-9720 Engine Ratings Electronic Software Gp     | 308-7226 Engine Ratings Electronic Software Gp     |
440-9721 Engine Ratings Electronic Software Gp     | 308-7227 Engine Ratings Electronic Software Gp     |
440-9722 Engine Ratings Electronic Software Gp     | 308-7228 Engine Ratings Electronic Software Gp     |
440-9723 Engine Ratings Electronic Software Gp     | 308-7229 Engine Ratings Electronic Software Gp     |
440-9724 Engine Ratings Electronic Software Gp     | 308-7230 Engine Ratings Electronic Software Gp     |
440-9725 Engine Ratings Electronic Software Gp     | 308-7231 Engine Ratings Electronic Software Gp     |
440-9726 Engine Ratings Electronic Software Gp     | 308-7232 Engine Ratings Electronic Software Gp     |
440-9727 Engine Ratings Electronic Software Gp     | 308-7233 Engine Ratings Electronic Software Gp     |
440-9728 Engine Ratings Electronic Software Gp     | 308-7234 Engine Ratings Electronic Software Gp     |
440-9729 Engine Ratings Electronic Software Gp     | 308-7235 Engine Ratings Electronic Software Gp     |
440-9730 Engine Ratings Electronic Software Gp     | 308-7236 Engine Ratings Electronic Software Gp     |
440-9731 Engine Ratings Electronic Software Gp     | 308-7237 Engine Ratings Electronic Software Gp     |
440-9732 Engine Ratings Electronic Software Gp     | 308-7238 Engine Ratings Electronic Software Gp     |
440-9733 Engine Ratings Electronic Software Gp     | 308-7239 Engine Ratings Electronic Software Gp     |
440-9734 Engine Ratings Electronic Software Gp     | 308-7240 Engine Ratings Electronic Software Gp     |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
C18 Generator Set Model View Illustrations
C13 and C15 Generator Sets After Starting Engine
C7.1 Marine Generator Set Welding on Engines with Electronic Controls
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove and Install
C7.1 Marine Generator Set System Pressure Release
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm - Assemble
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front) - Remove and Install
C175 Commercial Engine Intake Valve Recession {1100} C175 Commercial Engine Intake Valve Recession {1100}
C15 and C18 Engines for Caterpillar Built Machines Cylinder Liner - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C15 and C18 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft - Remove and Install
C7.1 Marine Generator Set Aftercooler Condensate Drain Valve - Inspect/Clean
C15 and C18 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C7.1 Marine Generator Set Battery or Battery Cable - Disconnect