Engine News Article List for S/N:8LL Engines {1000}
- Engine:
- 3608 (S/N: 8LL1-UP)
This article is a comprised list of all Engine News articles that may be relevant to 8LL engines.
Show/hide table
Media Number     | Article Title     | Published Date     |
---|---|---|
SEBD9960     | "New Fuel Injector Groups are Used on All 3600 Engines"     | , 19 September 2014     |
SEBD9947     | "Tri-Metal Rod Bearing Is Released for Service Replacement for all 3600, C280, and G3600 Engines"     | , 20 June 2014     |
SEBD9927     | "A New Prelubrication Oil Pressure Switch Is Used on All 3600 and C280 Engines"     | , 07 February 2014     |
"The 127-2450 Cylinder Head Kit Includes A New Cylinder Head Group" | ||
SEBD9892     | "A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines"     | , 21 August 2013     |
SEBD9884     | "Improved Pistons Are Used for Certain 3600 and C280 Engines"     | , 24 July 2013     |
SEBD9874     | "Installing Connecting Rod Bearings in G3600, 3600 and C280 Engines"     | , 6 June 2013     |
SEBD9868     | "Procedure for Disassembly and Assembly of the Pressure Relief Valve in Certain C32, G3500, 3500. 3600, and C280 Engines"     | , 8 May 2013     |
SEBD9865     | "A New Auxiliary Water Pump Is Used on Certain 3600 and C280 Engines"     | , 25 April 2013     |
"A New Turbocharger Support Assembly Is Used on C280-8 and 3608 Engines" | ||
SEBD9860     | "An Improved Lifter Assembly Is Available for C280 and 3600 Engines That Operate in Low Load Applications "     | , 4 April 2013     |
"Improved Pistons Are Used for Certain 3600 and C280 Engines" | ||
"New Turbochargers Are Used In Certain 3608 and 3616 Applications" | ||
SEBD9852     | "New Water Temperature Regulators Are Available for 3600, G3600, and C280 Engines"     | , 8 March 2013     |
SEBD9849     | "A New O-ring Seal Is Used On Fuel Injectors in 3600 and C280 Engines"     | , 27 February 2013     |
SEBD9844     | "Proper Installation of Connecting Rod Bearings for G3600, 3600, and C280 Engines"     | , 6 February 2013     |
SEBD9841     | "New Fuel Pressure Regulator and Set Screw Are Used for 3600 and C280 Engines"     | , 12 January 2013     |
SEBD9830     | "A New Oil Pan Is Used on 3608, G3608, and C280-8 Engines"     | , 30 November 2012     |
SEBD9827     | "Additional Crankcase Breathers Are Used on 3600 and C280 Engines"     | , 9 November 2012     |
"Improved Sealing for the Turbocharger" | ||
"List of Caterpillar Service Centers for Napier Turbochargers" | ||
SEBD9760     | "A New Air Shutoff Is Used on 3606, 3608, and C280-8 Engines"     | , 8 February 2012     |
SEBD9741     | "The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures"     | , 21 November 2011     |
"New Clamping for Water Lines on Certain 3600 and C280 Engines" | ||
SEBD9709     | "New Connecting Rod Bolts Are Used for 3600, G3600, and C280 Engines"     | , 31 May 2011     |
SEBD9673     | "Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls"     | , 18 October 2010     |
SEBD9672     | "New Tightening Procedure for Connecting Rod Bolts in 3600, G3600, and C280 Engines"     | , 13 October 2010     |
SEBD9670     | "Caterpillar Extended Life Inhibitor (ELI) Is Now Available for Use in Applications that Freeze Protection Is Not Needed"     | , 6 October 2010     |
SEBD9655     | "Concerns for Engines with Seawater Cooling in Oil Polluted Water"     | , 17 June 2010     |
SEBD9654     | "Procedure To Check Crankshaft Deflection in 3600 and C280 Engines"     | , 10 June 2010     |
SEBD9620     | "Proper Storage Procedures for Commercial Engines"     | , 3 December 2009     |
SEBD9608     | "Proper Usage of the Adjustment for the Fuel Injector Synchronization on 3600 Diesel Engines with Mechanical Unit Injectors (MUI)"     | , 30 September 2009     |
SEBD9597     | "A New Liquid Detector Group Is Used for the Continuous Prelubrication System in 3600 and C280 Engines"     | , 6 July 2009     |
SEBD9596     | "Retirement of Paper Version of Service Magazines and Engine News"     | , 29 June 2009     |
SEBD9592     | "Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts"     | , 1 June 2009     |
SEBD9588     | "How Is Service Information Accessed / Used"     | , 27 April 2009     |
SEBD9519     | "A New Water Seal and a New Spacer are Used for the Water Pumps"     | , 19 November 2007     |
SEBD9509     | "Provide Proper Documentation of Returned Parts within the Warranty Claim"     | , 10 September 2007     |
SEBD9448     | "Maintenance Recommendations for the Crankshaft Vibration Dampers"     | , 11 June 2007     |
SEBD9447     | "A Dye is Now Added to the Engine Oil at the Factory"     | , 4 June 2007     |
SEBD9444     | "A New Connecting Rod Nut is Used"     | , 14 May 2007     |
SEBD9443     | "100% Leak Testing of Oil Coolers"     | , 30 April 2007     |
SEBD9441     | "New Guidelines: When to Consult the Application Support Center (ASC) or the Dealer Solution Network (DSN)"     | , 16 April 2007     |
SEBD9424     | "Proper Use Of The 4C-5719 Piston Ring Compressor Helps Prevent Damage To The Oil Ring"     | , 7 December 2006     |
"Replacement Bearings are Listed" | ||
SEBD9413     | "Make Sure That the Plug and the Gasket are Installed in the Cylinder Head"     | , 11 September 2006     |
SEBD9410     | "Caterpillar Factory Commissioning Services"     | , 14 August 2006     |
SEBD9406     | "New Monitors and Mounting Groups for the Marine Monitoring Systems (MMS) are Available"     | , 10 July 2006     |
SEBD9404     | "New Connecting Rod Assemblies"     | , 26 June 2006     |
SEBD9395     | "A New Cooling System Application and Installation Guide is Now Available"     | , 24 April 2006     |
SEBD9392     | "A New Grease is Used"     | , 3 April 2006     |
SEBD9391     | "New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range"     | , 27 March 2006     |
SEBD9388     | "New Look for the Connecting Rod Bolt"     | , 6 March 2006     |
SEBD9387     | "Magnetic Cover for the Turbocharger Oil Supply Line"     | , 20 February 2006     |
SEBD9382     | "A New Knowledge Network Community is Active"     | , 16 January 2006     |
SEBD9381     | "New Guidelines for Inspecting Pistons"     | , 2 January 2006     |
SEBD9376     | "An Improved Clamp for the Aftercooler Water Lines is Used"     | , 28 November 2005     |
SEBD9369     | "Caterpillar Warranty Claims on Cylinder Head Valves"     | , 3 October 2005     |
SEBD9362     | "New Clamp, New O-Ring Seal, and New Tube Assemblies for the Fuel Injection Lines"     | , 1 August 2005     |
SEBD9358     | "A New Cylinder Liner And A New Combustion Gasket Are Used"     | , 2 June 2005     |
SEBD9356     | "New Strainer for the Air Starting Motor"     | , 30 May 2005     |
SEBD9353     | "Improved Connecting Rod Bearing is Used"     | , 9 March 2005     |
SEBD9340     | "Lifting Brackets and Hardware are Available"     | , 1 December 2004     |
SEBD9339     | "A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced"     | , 1 November 2004     |
SEBD9336     | "Large Engine Cylinder Head Groups"     | , 1 August 2004     |
"Special Instructions Are No Longer Announced In the Engine News" | ||
SEBD9335     | "Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool"     | , 1 July 2004     |
"Reusability of Connecting Rods" | ||
SEBD9333     | "New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap"     | , 1 May 2004     |
SEBD9332     | "Improved Gasket for the Engine Oil Cooler"     | , 1 April 2004     |
"Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers" | ||
"Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures" | ||
SEBD9328     | "An Improved Air Silencer is Used"     | , 1 December 2003     |
"Parts List for Prelube Pump Group Kits" | ||
SEBD9327     | "Adjust the Timing Dimension for the New Fuel Injector Groups"     | , 1 November 2003     |
"New Fuel Injector Groups are Used" | ||
SEBD9325     | "A New Bracket Reduces Vibration on the Air Silencer "     | , 1 September 2003     |
SEBD9323     | "Policy for Reusing the Turbocharger Turbine Housing"     | , 1 July 2003     |
SEBD9322     | "Different Types of Cases are Used on Remanufactured Fuel Injectors for Distillate Diesel Fuel"     | , 1 June 2003     |
"SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines" | ||
SEBD9319     | "A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only)"     | , 1 March 2003     |
SEBD9318     | "A New Overhaul Protection Group Is Available For The Overhaul Of A Cylinder"     | , 1 February 2003     |
"New Heat Shields for the Indicator Valves are Now Available" | ||
"Understanding Elevated Copper Levels in Used Oil Samples" | ||
SEBD9317     | "A New Drain Valve Group is Available to Drain Condensate from the Air Plenum"     | , 1 January 2003     |
SEBD9316     | "The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet"     | , 1 December 2002     |
SEBD9315     | "A New Special Instruction Provides Information About The Protection Of The Oil System During Major Repair"     | , 1 November 2002     |
"Parts Manuals For The Following Engines Are Now Provided On A CD-ROM" | ||
SEBD9314     | "New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups"     | , 1 October 2002     |
SEBD9312     | "Checking The Contents Of A Used Oil Filter And Checking The Backlash Of the Front Idler Gears Can Result In Improved Bearing Life For The Front Idler Gears"     | , 1 August 2002     |
"Engine Tool Lists And Machine Tool Lists Are Available On The Caterpillar Intranet" | ||
"Relocation Of The Service Center For 3600 Fuel Injectors" | ||
"The Standard 3 Phase Voltages That Are Available Have Changed For Options That Are Driven By Electric Motors" | ||
SEBD9311     | "New Crankshaft Seal Assemblies And New Crankshaft Wear Sleeves Are Use"     | , 1 July 2002     |
"New Exhaust Manifolds Are Available" | ||
SEBD9310     | "A New Valve Adjusting Screw Is Available "     | , 1 June 2002     |
"New Service Information Tool for Cat Dealers is Now Available" | ||
SEBD9309     | "Oversized Valve Seat Inserts Are Available"     | , 1 May 2002     |
"The 151-7417 Engine Liner Hone Is Available" | ||
"The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet" | ||
SEBD9308     | "A List Of Contacts For Caterpillar Product Support Is Available"     | , 1 April 2002     |
"A New Housing Assembly Includes Improved Bearings For The Fresh Water Pump" | ||
"A New Water Pump Shaft Is Available" | ||
"New Tools Are Available For Rebuilding The Cylinder Head" | ||
SEBD9307     | "A New Special Publication, LEBV1912, "Caterpillar 3600 Diesel Engine Single Cylinder Overhaul Procedure" Is Available"     | , 1 March 2002     |
"New Engine Oil Heater Groups Are Available And New Coolant and Engine Oil Heater Groups Are Available" | ||
"New Specification For The Minimum Fuel Pressure At The Inlet To The Fuel Transfer Pump" | ||
"The 3600 Lube Oil Experience List Is Available" | ||
"WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center" | ||
SEBD9304     | "New Crankshaft Assemblies Include Counterweights That Are Permanently Bolted To The Crankshafts"     | , 1 December 2001     |
SEBD9303     | "A New Temperature Indicator Assembly Is Available To Measure The Temperature Of The Air In The Air Inlet Manifold"     | , 1 November 2001     |
"The Content Of The 9U-5105 Basic Engine Tool Group Has Changed" | ||
SEBD9302     | "A New Tachometer Is Used In The Panels For Engine Monitoring And Protection"     | , 1 October 2001     |
"A New Threaded Collar Is Used In The Stud Tensioner Tool Group" | ||
"An Improved Taperlock Stud Is Used To Fasten The Main Bearing Cap To The Cylinder Block" | ||
"Information For Determining The Correct Pulses Per Revolution For Speed Pickups On Napier 297 Turbochargers" | ||
"Use Ferrules (Wire Ends) On The Ends Of The Wires That Are Connected To Terminal Strips" | ||
SEBD9301     | "A New Service Support Center Is Available For The Products That Are Assembled At The Large Engine Center"     | , 1 September 2001     |
"A New Speed Sensor is Available for Some Turbocharger Groups" | ||
"Repair Procedure for the Threads in a Cylinder Head Casting that were Damaged by a Manual Valve Group" | ||
"The Maintenance and Technical Handbook for 3600 Diesel Engines is now Available on a CD" | ||
"The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution" | ||
SEBD9300     | "A New Pyrometer Is Available"     | , 1 August 2001     |
"The Connecting Rod Bearing Now Has Marks For Identification On The Outside Of Each Bearing Half" | ||
SEBD9297     | "New Gear Assemblies Are Used In The Front Gear Group"     | , 1 May 2001     |
"Ports For Number 8 O-Ring Fittings Have Been Added To The Cylinder Block For The Oil Mist Detector" | ||
SEBD9296     | "New Air Shutoff Groups Are Used "     | , 1 April 2001     |
SEBD9294     | "A New Service Is Available For 3600 Engine Fuel Injectors"     | , 1 February 2001     |
SEBD9290     | "A New Fuel Filter Element Assembly Has Been Released"     | , 1 October 2000     |
SEBD9287     | "Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies "     | , 1 July 2000     |
SEBD9286     | "New Hydraulic Wrenches and Pumps "     | , 1 June 2000     |
SEBD9283     | "New Basic Cylinder Head Groups Include Premachined Valve Seat Inserts For Improved Reliability"     | , 1 March 2000     |
SEBD9282     | "A New Sensor Housing In Prelubrication Lines Groups (Continuous Prelube) Provides Improved Operation"     | , 1 February 2000     |
"Interactive Self-Paced Computer Training Course Available for Technical Marketing Information (TMI) System Users" | ||
"Reporting Incidents Through The Cat Neutral Net" |
Caterpillar Information System:
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
2013/08/30 A New Adapter Is Used on Certain 3512C Petroleum Engines {1157}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 109-3776 Generator through 109-7874 Generator
374F Excavator Hydraulic System General Information (Return System)
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Calibration Required - Test
793F and 797F Off-Highway Trucks Braking System Automatic Retarder Control (ARC)
3512C Oil Well Service Engines Air Shutoff - Test
Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605} Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
2013/11/21 An Improved ARD Combustion Head is Now Used on Certain Tier 4 Engines {108B, 108E, 108M}
2013/11/11 An Improved ARD Combustion Head is Now Used on the Tier 4 Engines of Certain Machines {108B, 108E, 108M}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 6I-0053 Generator through 6I-4860 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 203-5749 Generator through 324-5120 Generator
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606} Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Manifold (Pilot Oil) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Nozzle - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Nozzle - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Cannon - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Cannon - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Remove and Install
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Service Tools
C32 Generator Set Plate Locations and Film Locations
Customer Assembly Requirements for C7.1, C4.4, and C3.4B Engines {1000, 108D} Customer Assembly Requirements for C7.1, C4.4, and C3.4B Engines {1000, 108D}