Flywheel Housing
Show/hide table
图 1 | g03365736 |
Show/hide table
图 2 | g03365737 |
螺栓拧紧顺序 |
Show/hide table
353-9858 飞轮壳总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
在装配过程中,检查下列部件上有无任何异物:飞轮壳的前端面、飞轮壳垫片的两侧和缸体的后端面。 这些部件上必须没有以下物质:机油、燃油、水、垫片粘合剂、装配固定胶和任何其他异物。     | |||
在安装油底壳垫片和油底壳之前,涂抹少量的 1U-8846 垫片密封胶 来填充缸体、飞轮壳和油底壳之间的缝隙。 必须在涂抹垫片密封胶后的 20 分钟之内组装部件。     | |||
按照以下步骤拧紧飞轮壳螺栓:     | |||
1     | 4     | 165-3932 螺栓     | 1. 按照图 2 中所示的数字顺序,将螺栓 (1) 至螺栓 (9) 拧紧至扭矩为 100 ± 20 N·m (74 ± 15 lb ft)。 2. 按照图 2 中所示的数字顺序,将螺栓 (10) 至螺栓 (22) 拧紧至扭矩为 40 ± 10 N·m (30 ± 7 lb ft)。 螺栓 (14) 和螺栓 (15) 位于惰轮后面。 3. 按照图 2 中所示的数字顺序,再次将螺栓 (1) 至螺栓 (9) 拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 4. 按照图 2 中所示的数字顺序,再次将螺栓 (10) 至螺栓 (22) 拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。     |
2     | 3     | 223-4903 螺栓     | |
3     | 1     | 5J-5793 螺栓     | |
4     | 6     | 165-3930 螺栓     | |
5     | 8     | 8D-0648 螺栓     |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Flywheel
G3512H and G3516H Generator Set Engines Engine Oil Pan - Disassemble
G3512H and G3516H Generator Set Engines Engine Oil Pan - Remove and Install
C9.3 Industrial Engine Engine Control Module - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Filter Housing - Assemble
G3512H and G3516H Generator Set Engines Engine Oil Filter Housing - Disassemble
C9.3 Tier 4 Final Engines Cylinder Head Valves
2013/05/10 A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Flywheel
C9.3 Marine Engines Flywheel Housing
3176C and 3196 Engines for Caterpillar Built Machines Electric Starting Motor
C4.4 and C7.1 Engines Electrical Power Supply - Test
2013/07/22 A New Oil Mist Detector Mounting Bracket Is Used With Certain 3516C Engines {1336}
G3512H and G3516H Generator Set Engines Engine Oil Pan - Assemble
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
C7.1 Marine Engine Check Valve - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Generator Sets Product Installation