System Fuses (MMS System Cabinet)
The system cabinet contains external source sync and the fuses for the transformer.
The left panel of the cabinet holds two fuse blocks. One block is for the external source sync option if the option is present. The other block is for the transformers in the cabinet.
The right panel of the cabinet holds the fuses for the static switch if that option is present. Also, the right panel holds a fuse for the neutral ground reference if the system is 4 - wire.
Show/hide table
| |
| Illustration 1 | g01271421 |
|
Location of the fuses on the left panel (1) Fuses F4-F6 (2) Fuses F7-F12 | |
Show/hide table
| |
| Illustration 2 | g01271422 |
|
Location of the fuses on the right panel (3) Fuses F1-F3 (4) Fuses F18 | |
Show/hide table
| Fuse | Component |
| F1 | Static Switch Assembly Phase A(1) |
| F2 | Static Switch Assembly Phase B(1) |
| F3 | Static Switch Assembly Phase C(1) |
| F4 | External Source Sync Phase A(1) |
| F5 | External Source Sync Phase B(1) |
| F6 | External Source Sync Phase C(1) |
| F7 | T1 Transformer Primary Input |
| F8 | T1 Transformer Primary Return |
| F9 | T2 Transformer Primary Input |
| F10 | T2 Transformer Primary Return |
| F11 | T3 Transformer Primary Input |
| F12 | T3 Transformer Primary Return |
| F18 | 4 Wire Zig Zag Neutral Reference (2) |
Show/hide table
| (1) | Option |
| (2) | 4 Wire Only |
Show/hide table
| |
| Illustration 3 | g01271494 |
|
Left panel fuse wire connections | |
Show/hide table
| |
| Illustration 4 | g01271495 |
|
Right panel fuse wire connections | |
Caterpillar Information System:
C7.1 Engines Rocker Shaft - Disassemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (MMS System Cabinet)
C7.1 Engines Rocker Shaft - Assemble
C7.1 Engines Relief Valve (Fuel) - Remove and Install
C7.1 Engines Refrigerant Compressor - Remove and Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Information (MMS System Cabinet)
C7.1 Engines Rear Power Take-Off (RPTO) - Remove
C7.1 Engines Rear Power Take-Off (RPTO) - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Gen Set Module Circuit Breaker (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies External Source Sync Relay and Terminal Block
C7.1 Engines Pistons and Connecting Rods - Remove
C7.1 Engines Pistons and Connecting Rods - Install
C7.1 Engines Rocker Shaft and Pushrod - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Front Panel Display (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Purpose Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies EPO Reset Switch (MMS System Cabinet)
2013/03/22 A New Turbo Kit is Available for Certain 3500B Engines {1052, 1053}
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Monitor PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Controller PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Interface PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Power Distribution PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies AC Interface PWA (MMS System Cabinet)
C7.1 Engines Rocker Shaft and Pushrod - Remove
C7.1 Engines Turbocharger - Install - Turbocharger for Side Mounted Engines