General Information (MMS System Cabinet)
The system cabinet for the Multiple Module System (MMS) contains most the electronic control circuitry for the system. The MMS cabinet manages many UPS operations.
Show/hide table
Illustration 1 | g03797561 |
The number of MMU disconnect (isolation) switches will depend on the installation needs. (1) Fans (2) MMU disconnect switches (3) T1 and T2 transformers (4) System I/O and daughter boards (5) Static bypass control board |
Show/hide table
Illustration 2 | g03376780 |
The number of MMU disconnect (isolation) switches will depend on the installation needs. MMS system cabinet view (9) MMU 1 input isolation switch (10) MMU 1 output isolation switch (11) MMU 2 input isolation switch (12) MMU 2 output isolation switch (13) MMU 3 input isolation switch (14) MMU 3 output isolation switch (15) MMU 4 input isolation switch (16) MMU 4 output isolation switch (17) Flywheel |
Show/hide table
Illustration 3 | g01267899 |
Left panel of the MMS cabinet (20) Fan monitor PWA (21) Power distribution capacitors (22) Modem power transformer T4 (23) Power distribution PWA (24) Modem power supply (25) Parallel cabinet controller PWA (26) ESS fuses F4-F6 (27) EPO reset switch (28) 24 VDC power supplies (29) Parallel cabinet interface PWA (30) Transformer T2 (31) Transformer T1 (32) AC interface PWA (33) Secondary current transformers (34) System input/output PWA (35) Transformer T3 (36) Fuses F7-F12 (37) System input/output daughter PWA (38) External source sync (ESS) relay |
Show/hide table
Illustration 4 | g01267903 |
Right panel of the MMS cabinet (40) Fuses (F1, F2, F3) (41) Static switch assembly (42) Ground reference assembly (43) Neutral reference assembly |
Show/hide table
Illustration 5 | g03797579 |
Static switch assembly components (5) Static bypass control board (40) Fuses (F1, F2, F3) (44) K4 disconnect |
Caterpillar Information System:
C7.1 Engines Rear Power Take-Off (RPTO) - Remove
C7.1 Engines Rear Power Take-Off (RPTO) - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Gen Set Module Circuit Breaker (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies External Source Sync Relay and Terminal Block
C7.1 Engines Pistons and Connecting Rods - Remove
C7.1 Engines Pistons and Connecting Rods - Install
C7.1 Engines Pistons and Connecting Rods - Disassemble
C7.1 Engines Pistons and Connecting Rods - Assemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Isolation Switches
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Transformer
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System Fuse (Input/Output Cabinet)
C7.1 Engines Refrigerant Compressor - Remove and Install
C7.1 Engines Relief Valve (Fuel) - Remove and Install
C7.1 Engines Rocker Shaft - Assemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (MMS System Cabinet)
C7.1 Engines Rocker Shaft - Disassemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System Fuses (MMS System Cabinet)
C7.1 Engines Rocker Shaft and Pushrod - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Front Panel Display (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Purpose Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies EPO Reset Switch (MMS System Cabinet)
2013/03/22 A New Turbo Kit is Available for Certain 3500B Engines {1052, 1053}
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Monitor PWA (MMS System Cabinet)