C7.1 Marine Engine Caterpillar


Engine Oil Filter Base - Remove and Install - M.C.S. Duplex Engine Oil Filter Base

Usage:

C7.1 JME

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
185-3630  Strap Wrench As 


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g03360376

  1. Using Tooling (A), Remove oil filters (5).

  2. Disconnect hoses assemblies (1).

  3. Disconnect harness assembly (3).

  4. Remove bolts (2) and remove oil filter base (4). There are four bolts in total.

Installation Procedure

  1. Install M.C.S. duplex engine oil filter base (4) in the reverse order of removal.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.