Fuel Priming Pump - Mechanical Priming Pump
Show/hide table
NOTICE |
---|
Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
If necessary, install a new fuel filter element to canister (5). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (Water Separator) Element - Replace" for the correct procedure.
Show/hide table
Illustration 1 | g03347830 |
Typical example (2) Primary fuel filter base |
(1) Tighten the connectors to the following torque. ...
(3) Tighten the plugs to the following torque. ...
(4) Tighten the bolts to the following torque. ...
Caterpillar Information System:
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Pressure Sensor
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Electronic Control Module (Engine) - Remove and Install
C175-16 Locomotive Engine Coolant Temperature Is Low
C175-16 Locomotive Engine Crankshaft - Remove and Install
C7.1 Industrial Engine Maintenance Interval Schedule
C32 Marine Engines Auxiliary Water Pump - Sea water
C32 Marine Engines Cylinder Head Valves
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install
C7.1 Engines for Caterpillar Built Machines Turbocharger
C175-16 Locomotive Engine Pistons, Liners, and Connecting Rods - Remove and Install
C280-16 Engine Engine Power Ratings
C7.1-XQ200 Rental Generator Set Refill Capacities
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install