Diesel Exhaust Fluid Module - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 207-1601 | Rubber Lubricant | 1 |
| 207-1600(1) | Rubber Lubricant | 1 | |
Show/hide table
| (1) | For EAME use only |
Start By:
- Connect the steering frame lock.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Raise hood (1) by activating switch (2). Turn battery disconnect switch (3) to the OFF position.
Show/hide table
Illustration 2 g03347396 - Remove cover (4).
Show/hide table
Illustration 3 g03347400 - Remove bolts (6) in order to set filler tube (5) out of the way. Remove bolts (7) and remove cover (8).
Show/hide table
Illustration 4 g03347510 - Disconnect hose assembly (9) and the O-ring seal. Disconnect clips (10).
Show/hide table
Illustration 5 g03347542 - Disconnect harness assembly (11).
Show/hide table
Illustration 6 g03347545 - Disconnect hoses (12).
Show/hide table
Illustration 7 g03347551 - Remove panel (13) and the ladder as one.
Show/hide table
Illustration 8 g03347560 - Disconnect harness assemblies (14).
Show/hide table
Illustration 9 g03347564 - Remove drain plug (17) in order to drain diesel exhaust fluid module tank (16) into a suitable container. Diesel exhaust fluid module tank (16) holds approximately
19.2 L (5.06 US gal) of fluid. - Remove bolts (15).
Show/hide table
Illustration 10 g03347566 - Remove bolts (18).
Show/hide table
Illustration 11 g03347568 - Disconnect hose (19) from diesel exhaust fluid module (20). Remove diesel exhaust fluid module (20).
Show/hide table
| |
| Illustration 1 | g03330059 |
- Install diesel exhaust fluid module (20) in the reverse order of removal.
- Tighten drain plug (17) to torque of
11 ± 3 N·m (97 ± 275 lb in) . - Apply Tooling (A) to the O-ring seal for hose assembly (9).
- Tighten drain plug (17) to torque of
Caterpillar Information System:
773F and 775F Off-Highway Truck Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New
Product Link ™ PLE702, PLE601, PLE602, PLE602P, PL641, PL641V2, PL631, PL631V2, PL542, PL240, PL240B, PL241, PL131, PL141, PL161, and PL042 Systems System Overview
Product Link ™ PLE702, PLE601, PLE602, PLE602P, PL641, PL641V2, PL631, PL631V2, PL542, PL240, PL240B, PL241, PL131, PL141, PL161, and PL042 Systems General Hazard Information
Product Link ™ PLE702, PLE601, PLE602, PLE602P, PL641, PL641V2, PL631, PL631V2, PL542, PL240, PL240B, PL241, PL131, PL141, PL161, and PL042 Systems Safety Signs and Labels
C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
AP1000F Asphalt Paver Operator Controls
C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Stick Cylinder - Remove and Install
2013/03/04 Debris Ejector Is Now Available on the Cleaner Groups on Certain Track Feller Buncher Machines {1051, 1054}
345D, 349D and 349D2 Excavator Machine System Specifications Seat Mounting
C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C7.1 Engines for Caterpillar Built Machines Power Sources
2014/04/15 An Improved Lip Type Seal and Wear Sleeve Seal Are Now Used in the Transfer Gear Group of Certain 777 Off-Highway Trucks {3159}
MH3049 Material Handler Machine Systems Cab - Remove and Install
MH3037, MH3049 and MH3059 Material Handlers IQAN Monitoring & Control System Auxiliary Group
MH3037, MH3049 and MH3059 Material Handlers IQAN Monitoring & Control System Boom Group
MH3037, MH3049 and MH3059 Material Handlers IQAN Monitoring & Control System Function Group
R1600G Load Haul Dump Braking System Service and Parking Brake System
793F Tier IV Off-Highway Truck Field Assembly Mirror - Install - Rear View
R1600G Load Haul Dump Braking System Brake Release System
R1600H Load Haul Dump Machine Systems Control Valve (STIC Steering) - Disassemble
R1600G Load Haul Dump Machine Systems Control Valve (STIC Steering) - Assemble
793F Tier IV Off-Highway Truck Field Assembly Fender - Install - Mud Guards
R2900G Load Haul Dump Braking System Pressure Sensor (Service Brake Oil)