C3.3B Engines for Caterpillar Built Machines Caterpillar


Boost Pressure Sensor - Remove and Install

Usage:

236D BGZ

拆卸步骤



    图 1g03339024

  1. 断开线束组件 (4)。 卸下软管 (3)。 拆下螺栓 (2),以拆下增压压力传感器 (1)。

安装步骤

  1. 按与拆卸相反的顺序安装增压压力传感器 (1)。

    1. 拧紧螺栓 (2) 至扭矩为 4 N·m (35 lb in) 5 N·m (44 lb in)

Caterpillar Information System:

C32 Marine Generator Set Control Panel - Marine Generator Set Engine Control Panel 3 (MGECP 3)
Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078} Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078}
2013/03/29 New Engine Oil Hoses Are Used on Certain Excavators Equipped with C13 Engines {1308}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000} Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
C32 Auxiliary Engine Belts - Inspect/Adjust/Replace
2013/01/21 New Software is Available for Certain 3512C Petroleum Engines {1901, 1920}
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C9.3 Industrial Engine Fumes Disposal Filter Element - Replace - Emission Related Component
2013/01/21 New Fuel Pressure Regulator and Set Screw Are Used for 3600 and C280 Engines {1252, 1254}
2013/01/21 Software Update For Proper Air Fuel Ratio Controller Operation Of Certain G3408 and G3412 Engines {1901, 1920}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280} 398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
C175-16 Marine Propulsion Engines Engine Shutdown Occurrence
C3.3B Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
2013/02/06 Different Water Temperature Regulators (Thermostats) are Available for G3600 Engines {1355}
C3.3B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.