Crankshaft Rear Seal and Wear Sleeve - Remove - Includes Crankshaft Gear
开始:
- 拆下飞轮。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将发动机置于上止点。
Show/hide table
图 1 g02799897 - 使用螺丝刀拆下曲轴后油封 (1)。
Show/hide table
图 2 g02799899 - 检查曲轴齿轮 (2) 和凸轮轴齿轮 (3) 的对准情况。 拆下曲轴齿轮 (2) 和密封圈。
Show/hide table
图 3 g02799901 - 将曲轴齿轮 (2) 连同耐磨套筒 (4) 置于合适的台钳中。 使用合适的凿子拆下耐磨套筒 (4)。
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Install - Includes Crankshaft Gear
C3.3B Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C3.3B Engines for Caterpillar Built Machines Idler Gear - Remove and Install
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
C3.3B Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C3.3B Engines for Caterpillar Built Machines Bridge Dowels - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Diesel Particulate Filter - Clean
2014/05/30 Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2014/05/30 An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
PM3516 Power Modules Belts - Inspect/Adjust/Replace
C3.3B Engines for Caterpillar Built Machines Flywheel - Remove and Install
C3.3B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C3.3B Engines for Caterpillar Built Machines Water Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
2013/01/21 New Software is Available for Certain 3512C Petroleum Engines {1901, 1920}
C32 Auxiliary Engine Belts - Inspect/Adjust/Replace
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000} Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}