C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar


Cylinder Head Valves

Usage:

CB-22B 2B2


Illustration 1g00903737
Typical example

(1) Valve spring

Standard free length for C1.5, and C2.2 engines ... 35.0 mm (1.378 inch)
Service limit for the standard free length for C1.5, and C2.2 engines ... 33.5 mm (1.319 inch)
Standard test force for C1.5, and C2.2 engines ... 79 N (17.8 lb)
Service limit for the standard test force for C1.5, and C2.2 engines ... 68.6 N (15.4 lb)
Length under test force for C1.5, and C2.2 engines ... 30.4 mm (1.197 inch)

(2) Valve guide seal for the exhaust valve

Identification ... Black garter spring
Label on the black garter spring ... "EX"

(3) Valve guide seal for the inlet valve

Identification ... Silver garter spring

(4) Valve spring recess for the valve spring



Illustration 2g00903744
Typical example

(5) Exhaust valve guide

(A) Clearance between the exhaust valve and the valve guide

C1.5 and C2.2 engines ... 0.050 to 0.075 mm (0.0020 to 0.0030 inch)
Service limit ... 0.25 mm (0.010 inch)

(6) Inlet valve guide

(A) Clearance between the inlet valve and the valve guide

C1.5 and C2.2 engines ... 0.030 to 0.060 mm (0.0012 to 0.0024 inch)
Service limit ... 0.2 mm (0.008 inch)

(7) Exhaust valve stem

Diameter of the exhaust valve stem for C1.5, and C2.2 engines ... 6.940 to 6.955 mm (0.2732 to 0.2738 inch)
Service limit ... 6.84 mm (0.269 inch)

(8) Inlet valve stem

Diameter of the inlet valve stem for C1.5, and C2.2 engines ... 6.955 to 6.970 mm (0.27382 to 0.27441 inch)
Service limit ... 6.89 mm (0.271 inch)


Illustration 3g00845823
Typical example

(B) Thickness of the valve head ... 0.925 to 1.075 mm (0.03642 to 0.04232 inch)

Service limit ... 0.5 mm (0.020 inch)



Illustration 4g00903773
Typical example

(C) Valve depth below the cylinder head face

Inlet and exhaust valves

C1.5, and C2.2 engines ... 0.65 to 0.95 mm (0.0256 to 0.0374 inch)
Service limit (All models) ... 1.8 mm (0.071 inch)


Illustration 5g00903760
Typical example

(D) Valve seat angle ... 45 degrees

(E) Contact face

Exhaust valve

C1.5 ... 1.66 to 1.73 mm (0.0653 to 0.0681 inch)
C2.2 ... 1.94 to 2.16 mm (0.0764 to 0.0850 inch)
Service limit (All models) ... 2.5 mm (0.098 inch)

Inlet valve

C1.5 ... 1.66 to 1.87 mm (0.0653 to 0.0736 inch)
C2.2 ... 1.50 to 2.00 mm (0.0591 to 0.0790 inch)
Service limit (All models) ... 2.5 mm (0.098 inch)

Caterpillar Information System:

C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Block
3500 Marine Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C1.5 and C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
3516B Engine for the MT4400D Off-Highway Truck Gear Group (Rear)
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
C27 and C32 Industrial Engines Engine Oil Level - Check
2012/12/21 A New Piston, Piston Rings, and Cylinder Liner Are Used with Certain G3516E and G3520E Engines {1201, 1214, 1215, 1216}
2013/01/10 TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C175-16 Locomotive Engine Component Location
C175-16 Locomotive Engine Inlet Manifold
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451} Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451}
Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250} Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250}
C18 Marine Auxiliary and Marine Generator Set Engines Cooling System
C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front)
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.