C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar


Cylinder Block

Usage:

CB-22B 2B2


Illustration 1g00904878
Typical example

(1) Diameter of the bore in the cylinder block ... 84.000 to 84.019 mm (3.3071 to 3.3078 inch)

Service limit ... 84.200 mm (3.3150 inch)



Illustration 2g00901145
Typical example

Flatness of the top of the cylinder block ... Less than 0.05 mm (0.002 inch)

Service limit ... 0.12 mm (0.005 inch)

Note: Use a straight edge and a feeler gauge to check the six positions for flatness.

Note: The front crankshaft bearing must be installed with the chamfer toward the cylinder block. Ensure that the oil hole in the front crankshaft bearing is aligned with the oil hole in the cylinder block.

Caterpillar Information System:

3500 Marine Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C1.5 and C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
3516B Engine for the MT4400D Off-Highway Truck Gear Group (Rear)
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
C27 and C32 Industrial Engines Engine Oil Level - Check
2012/12/21 A New Piston, Piston Rings, and Cylinder Liner Are Used with Certain G3516E and G3520E Engines {1201, 1214, 1215, 1216}
2013/01/10 TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
C18 Marine Auxiliary and Marine Generator Set Engines Engine Valve Lash - Inspect/Adjust
C27 and C32 Industrial Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C175-16 Locomotive Engine Component Location
C175-16 Locomotive Engine Inlet Manifold
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451} Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451}
Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250} Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250}
C18 Marine Auxiliary and Marine Generator Set Engines Cooling System
C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.