3500 Marine Engines Caterpillar


Turbocharger

Usage:

3516 29Z


Illustration 1g03324904

Table 1
Specification for 343-5687 Turbocharger Gp 
Item  Qty  Part  Specification Description 
10  287-7200 Bolt  Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize. 
Torque to 40 ± 3 N·m (30 ± 2 lb ft).
283-4294 Clamp As  Use the following procedure in order to tighten the nut of the clamp assembly:  
Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize.
1. Tighten the nut approximately to 20 N·m (177 lb in).
2. Gently hit around the clamp assembly with a soft hammer.
3. Again, tighten the nut to 30 ± 2 N·m (266 ± 18 lb in).
4. Again, gently hit around the clamp assembly with a soft hammer.
5. Again, tighten the nut to 30 ± 2 N·m (266 ± 18 lb in).

Caterpillar Information System:

C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C1.5 and C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
3516B Engine for the MT4400D Off-Highway Truck Gear Group (Rear)
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
C27 and C32 Industrial Engines Engine Oil Level - Check
2012/12/21 A New Piston, Piston Rings, and Cylinder Liner Are Used with Certain G3516E and G3520E Engines {1201, 1214, 1215, 1216}
2013/01/10 TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
C18 Marine Auxiliary and Marine Generator Set Engines Engine Valve Lash - Inspect/Adjust
C27 and C32 Industrial Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C175-16 Locomotive Engine Electrical Power Supply - Test
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Block
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C175-16 Locomotive Engine Component Location
C175-16 Locomotive Engine Inlet Manifold
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451} Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451}
Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250} Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250}
C18 Marine Auxiliary and Marine Generator Set Engines Cooling System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.