Connecting Rod Bearing Journal
Show/hide table
| Diameter of the C1.5 and C2.2 Connecting Rod Bearing Journals | ||
|---|---|---|
| Journals | Diameter | Service limit |
| Standard | |
|
| Undersize |
|
|
| Undersize |
|
|
Show/hide table
| (1) | If the diameter of the connecting rod bearing journal is less than the maximum undersize service limit, the crankshaft must be replaced. |
Clearance between the connecting rod bearing and the connecting rod bearing journal
- C1.5 and C2.2 ...
0.035 to 0.085 mm (0.00138 to 0.00335 inch)
Standard clearance
- Service limit ...
0.20 mm (0.0079 inch)
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
3516B Engine for the MT4400D Off-Highway Truck Gear Group (Rear)
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
C27 and C32 Industrial Engines Engine Oil Level - Check
2012/12/21 A New Piston, Piston Rings, and Cylinder Liner Are Used with Certain G3516E and G3520E Engines {1201, 1214, 1215, 1216}
2013/01/10 TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
C18 Marine Auxiliary and Marine Generator Set Engines Engine Valve Lash - Inspect/Adjust
C27 and C32 Industrial Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C175-16 Locomotive Engine Electrical Power Supply - Test
C27 and C32 Generator Sets Coolant Sample (Level 1) - Obtain
3500 Marine Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Block
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C175-16 Locomotive Engine Component Location
C175-16 Locomotive Engine Inlet Manifold
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451} Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451}
Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250} Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250}