C175-16 Marine Engine Caterpillar


Junction Box

Usage:

C175-16 R1X



Illustration 1g03324428

Table 1
Specification for 350-4531 Control Box Gp    
Item     Qty     Part     Specification Description    
1     -     -     Tighten the front harness connector to
40.8 ± 6.8 N·m (30.1 ± 5.0 lb ft).    
2     -     -     Final installation torque for ECM connector is
6 ± 1 N·m (53 ± 9 lb in).    
3     16     6V-5683 Bolts     Before assembly, apply blue Loctite 242 thread sealant to the bolts.    
4     -     -     Tighten the service tool connector to
5.6 ± 0.5 N·m (49.6± 4.4 lb in).    

Caterpillar Information System:

G3500 Engines Air Starting Motor
C175-16 Locomotive Engine Flywheel Housing Cover
2013/03/27 A New Seal Improves Starter Durability on Certain Industrial Engines {1453, 7555}
C175-16 Locomotive Engine Configuration Parameters
C175-16 Locomotive Engine Electrical Connectors
C27 and C32 Industrial Engines and C32 Petroleum Engine Refill Capacities
3516B Engine Air Conditioner Compressor - Remove and Install
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines{1250, 1280} Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines{1250, 1280}
3516B Engine Water Temperature Regulators - Install
Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain C175-16 Generator Sets{1050, 1091} Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain C175-16 Generator Sets{1050, 1091}
421-9726 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 421-9726 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
C27 and C32 Industrial Engines Coolant (ELC) - Change
C175-16 Locomotive Engine Engine Oil Lines
C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft
C175-16 Locomotive Engine Water Lines
C27 and C32 Generator Sets Coolant Sample (Level 1) - Obtain
C175-16 Locomotive Engine Electrical Power Supply - Test
C27 and C32 Industrial Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C18 Marine Auxiliary and Marine Generator Set Engines Engine Valve Lash - Inspect/Adjust
2013/01/10 TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2012/12/21 A New Piston, Piston Rings, and Cylinder Liner Are Used with Certain G3516E and G3520E Engines {1201, 1214, 1215, 1216}
C27 and C32 Industrial Engines Engine Oil Level - Check
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.