Thumb - Lubricate
Show/hide table
| |
| Illustration 1 | g02993499 |
|
Typical example of grease zerk locations. Some locations may not be visible. | |
- Clean all the fittings before you lubricate the fittings.
- Grease should be applied daily to the pins and the bores.
Reference: Refer to Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Lubricant Recommendations" for information on proper lubricants.
Caterpillar Information System:
Hydraulic Thumbs Lifting and Tying Down
Hydraulic Thumbs Shipping
826K Landfill Compactor Alternate Exit
Hydraulic Thumbs Transport Position
314E CR and 314E SR Excavator Systems Electronic Control Module
314E CR and 314E SR Excavator Systems Boom System
Hydraulic Thumbs Plate Locations and Film Locations
Hydraulic Thumbs Safety Messages
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201} Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
314E CR and 314E SR Excavator Systems Negative Flow Control System
2012/04/12 New Engine Software Is Used on Certain Excavators {1901, 1902, 1920, 7620}
314E CR and 314E SR Excavator Systems Main Control Valve
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
314E CR and 314E SR Excavator Systems Stick System
C2.6 and C3.3B Engines for Caterpillar Built Machines Water Temperature Regulator
C2.6 and C3.3B Engines for Caterpillar Built Machines Cylinder Head
314E CR and 314E SR Excavator Systems Bucket System
C2.6 and C3.3B Engines for Caterpillar Built Machines Engine Oil Cooler
C2.6 and C3.3B Engines for Caterpillar Built Machines Fan Drive
320E and 323E Excavators Machine System Specifications Pilot Lines
329F and 330F Excavators Machine System Specifications Pilot Lines
C3.4B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C2.6 and C3.3B Engines for Caterpillar Built Machines Valve Mechanism Cover
C2.6 and C3.3B Engines for Caterpillar Built Machines Cylinder Head Valves