Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170} Caterpillar


Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}

Usage:

769C 01X


Articulated Truck
All
Challenger
All
Cold Planer
All
Integrated Toolcarrier
All
Landfill Compactor
All
Load Haul Dump
All
Mini Hydraulic Excavator
All
Motor Grader
All
Off-Highway Truck/Tractor
All
Pipelayer
All
Road Reclaimer/Soil Stabilizer
All
Soil Compactor
All
Telehandler
All
Track-Type Loader
All
Track-Type Skidder
All
Track-Type Tractor
All
Underground Articulated Truck
All
Wheel Dozer
All
Wheel Loader
All
Wheel Skidder
All
Wheel Tractor-Scraper
All

Introduction

Table 1
Revision  Summary of Changes in SEBF2106 
05  Added 3 part numbers.
Updated copyright date to 2018.
Consolidated media references in to a table.
Arranged table ***#i07420800/i07380577.28*** part numbers in numerical order. 
04  Added 3 part numbers. 
03  Added 5 part numbers. 
02  Added 2 part numbers. 

© 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.

Information contained in this document is considered Caterpillar: Confidential Yellow.

This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.

For technical questions when using this document, work with your Dealer Technical Communicator (TC).

To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.

Canceled Part Numbers and Replaced Part Numbers

This document may not include canceled part numbers and replaced part numbers. Use NPR on SIS for information about Canceled part numbers and replaced part numbers. NPR will provide the current part numbers for replaced parts.

Important Safety Information



Illustration 1g02139237

Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly. Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not recommended by Caterpillar is used, ensure that the procedure is safe for you and others. Ensure that the product will not be damaged or be made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used.

------ WARNING! ------

Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in injury or death.

Do not operate or perform any lubrication, maintenance or repair on this product, until you have read and understood the operation, lubrication, maintenance and repair information.


Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons.

The hazards are identified by the safety alert symbol which is followed by a signal word such as danger, warning, or caution. The "WARNING" safety alert symbol is shown below.



Illustration 2g00008666

This safety alert symbol means:

Pay attention!

Become alert!

Your safety is involved.

The message that appears under the safety alert symbol explains the hazard.

Operations that may cause product damage are identified by "NOTICE" labels on the product and in this publication.

Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The safety information in this document and the safety information on the machine are not all inclusive. Determine that the tools, procedures, work methods, and operating techniques are safe. Determine that the operation, lubrication, maintenance, and repair procedures will not damage the machine. Also, determine that the operation, lubrication, maintenance, or the repair procedures will not make the machine unsafe.

The information, the specifications, and the illustrations that exist in this guideline are based on information which was available at the time of publication. The specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time. These changes can affect the service that is given to the product. Obtain the complete, most current information before you start any job. Caterpillar dealers can supply the most current information.

References

For further information on the equipment needed to perform thermal spray processes, refer to the following publications:

Table 2
References 
Media Number  Title 
SEBF9236  Special Instruction , "Fundamentals of High Velocity Oxygen Fuel (HVOF) Spray for Reconditioning Components" 
SEBF9238  Special Instruction , "Fundamentals of Arc Spray for Reconditioning Components" 
SEBF9240  Special Instruction , "Fundamentals of Flame Spray for Reconditioning Components" 

Part Description

Table 3
Base Metal  Cast Iron 

Arc Spray Equipment and Procedure

Table 4
Maximum Surface Finish  2.25 Micrometer (90 Microinch) Ra 
Reason for Spraying  Wear at seal contact area 
Mating Part Contact Area & Material  Cast iron or vespel seal rings 
Arc Spray Equipment Type  SmartArc by Oerlikon Metco PPG Electric Arc Gun, TAFA 8830 MHU, or TAFA 8835 MHU. 
Wire  TAFA 30T Wire Top Coat, TAFA 75B Wire Bond Coat 
Finish Thickness  As required 
Finishing Allowance  0.51 mm (0.020 inch) - 0.64 mm (0.025 inch) per side 
Spray Angle  90° 
Substrate Pre-Heat Temperature  66° C (150° F) Do not direct arc on area to be sprayed. 
Substrate Temperature During Spraying Not to Exceed  148° C (300° F) 
Auxiliary Cooling  Filtered shop air, if desired 
Rotation/Traverse Device  Lathe or turntable 
Rotation/Traverse Speed  92 SMPM (300 SFPM) 
Surface Preparation Method  Machine to "tru-up" surface, grit blast 
Machining Method  Machine 
Equipment Required  Turn (Lathe) 
Recommended Cutting Tool  ISCAR DNMG 432 TF IC507 
Blast Media Recommendation  Pressure Type Only (Aluminum Oxide Grit) 

Table 5
Arc Spray  Procedure  Check List 
Clean Part  Degrease in hot caustic solution   
Undercut  To "true-up" surface   
Chamfer  If required - 1.0 mm (0.039 inch) x 45°   
Remove Oxide  Use emery or glass beading   
Clean Spray Area  Commercial degreaser   
Mask for grit blast  Duct tape   
Grit Blast Equipment  Pressure type only   
Grit type and size  20 mesh aluminum oxide   
Blast air pressure  690 kPa (100.0 psi)   
Blast nozzle to work distance  51 mm (2.0 inch) - 150 mm (6.0 inch)   
Remove blast mask  Make sure that surface is clean   
Mask for Metal Spray  Oerlikon Metco Anti-Bond   
Metal Spray Equipment Type  Oerlikon Metco Smart Arc  TAFA   
  Consumable (Bond coat)  TAFA 75B  TAFA 75B   
  Clamp Pressure  275 kPa (40.0 psi)     
  Air Jets/Pressure  415 kPa (60.0 psi)  415 kPa (60.0 psi)   
  Arc Load Volts  30 V  30 V   
  Amps  125 Amps  150 Amps   
  Gun to work distance (Standoff)  128 mm (5.0 inch)  128 mm (5.0 inch)  
  Spray Rate/Bond Pass  0.0015 in/pass  0.0015 in/pass   
  Consumable (Topcoat)  TAFA 30T  TAFA 30T   
  Clamp Pressure  275 kPa (40.0 psi)     
  Air Jets/Pressure  415 kPa (60.0 psi)  415 kPa (60.0 psi)   
  Arc Load Volts  31 V  31 V   
  Amps  150 Amps  175 Amps   
  Gun to work distance (Standoff)  166 mm (6.5 inch)  166 mm (6.5 inch)   
  Spray Rate/Build Up  0.0023 in/pass  0.0023 in/pass   
  Rotation Speed of Part (RPM)  RPM varies with piston diameter   
  Rotation Speed of Part  92 SMPM (300 SFPM)   
  Traverse Rate of Gun  11 SMPM (36 SFPM)   
Gun Fixturing Method  Machine mount or hand held   
Finishing Equipment  Lathe   
Part/Cutter Rotation (Roughing)  50 SMPM (150 SFPM)   
Part/Cutter Rotation (Finishing)  75 SMPM (250 SFPM)   
Coolant  Oil based synthetic - 40:1 ratio   
Traverse Speed  0.30 mm (0.012 inch) per revolution.   
Depth of Rough Cut  0.51 mm (0.020 inch) per side   
Depth of Finish Cut  0.25 mm (0.010 inch) per side   

Flame Spray Equipment and Procedure

Table 6
Maximum Surface Finish  2.25 Micrometer (90 Microinch) Ra 
Reason for Spraying  Wear at seal contact area 
Mating Part Contact Area & Material  Cast iron or vespel seal rings 
Oerlikon Metco Equipment Type  6PII by Oerlikon Metco 
Oerlikon Metco Material  Oerlikon Metco 
Finish Thickness  As Required 
Finishing Allowance  0.51 mm (0.020 inch) to 0.64 mm (0.025 inch) per side 
Spray Angle  90° 
Substrate Pre-Heat Temperature  66° C (150° F) Do not direct flame on area to be sprayed 
Substrate Temperature During Spraying Not to Exceed  148° C (300° F) 
Auxiliary Cooling  Filtered shop air, if desired 
Rotation/Traverse Device  Lathe or turntable 
Rotation/Traverse Speed  92 SMPM (300 SFPM) 
Surface Preparation Method  Machine to "tru-up" surface, grit blast 
Finishing Method  Machine 
Machining Equipment Type  Lathe 
Recommended Cutter Grade  C-2, 883 Carboloy or equivalent 

Table 7
Flame Spray Process (6P)  Procedure  Check List 
Clean Part  Degrease in hot caustic solution.   
Undercut  To "tru-up" surface   
Chamfer  45° x 1.00 mm (0.040 inch)   
Remove Oxide  Use emery paper or glass beading   
Clean Spray Area  Oerlikon Metco cleaning solvent or equivalent   
Mask for Grit Blast  Duct tape   
Blast Equipment  Suction cabinet   
Grit Type and Size  Metcolite "C" or equivalent   
Blast Air Pressure  620 kPa (90.0 psi)   
Blast Nozzle to Work Distance  50 mm (2.0 inch)   
Remove Blast Mask  Remove mask, make sure that surface is clean   
Mask for Spray  Use metal mask or Oerlikon Metco Anti-Bond   
Spray Equipment Type  6P-II hand held thermo spray system   
Auxiliary Cooling  If desired   
Nozzle  6P-C7A-K "K" Nozzle   
Air Capacity/pressure  6P-3/Cooling air 140 kPa (20.0 psi) - 170 kPa (25.0 psi)   
Oxygen Pressure  210 kPa (30.0 psi)   
Oxygen Flow  1190 L/h (42.0 cfh)   
Fuel Gas Pressure  100 kPa (15.0 psi)   
Fuel Gas Flow  1415 L/h (50.0 cfh)   
Carrier Gas Pressure  380 kPa (55.0 psi)   
Carrier Gas Flow  1050 L/h (37.0 cfh)   
Spray Rate/Build Up  5.5 kg (12.0 lb)/hour 90 g (3.2 oz)/min   
Gun to Work Distance  230 mm (9.0 inch)   
Rotation Speed of Part (RPM)  Varies with piston diameter   
Rotation Speed of Part  92 SMPM (300 SFPM)   
Traverse Rate of Gun  15 SMPM (50 SFPM)   
Gun Fixturing Method  Machine mount or hand held   
Bond Pass/Thickness  0.10 mm (0.004 inch) to 0.15 mm (0.006 inch) per pass   
Top Coat/Thickness  0.64 mm (0.025 inch)   
Finishing Equipment  Lathe   
Part/Cutter Rotation  92 SMPM (300 SFPM)   
Traverse Speed  0.05 mm (0.002 inch) to 0.10 mm (0.004 inch) per revolution   
Depth of Rough Cut  0.38 mm (0.015 inch) to 0.51 mm (0.020 inch) per side   
Depth of Finish Cut  0.25 mm (0.010 inch) to 0.38 mm (0.015 inch) per side   
Additional Finish Method  Use fine emery cloth (240 grit) for final polish   

Specifications



Illustration 3g02987776


Illustration 4g02987777


Illustration 5g02987779


Illustration 6g02987780


Illustration 7g02987781


Illustration 8g02987782


Illustration 9g02987784


Illustration 10g02987785


Illustration 11g02987786


Illustration 12g02987787


Illustration 13g02987788

Table 8
Track-Type Tractors and Pipelayers Clutch Piston Dimensions 
Part No.  Illus. No  Dia. A
mm (in) 
Dia. B
mm (in) 
Dia. C
mm (in) 
Dia. D
mm (in) 
Dia. E
mm (in) 
Dia. F
mm (in) 
1K-8938  222.76 ± 0.05 mm (8.770 ± 0.002 inch)  285.42 ± 0.05 mm (11.237 ± 0.002 inch)  20.07 ± 0.13 mm (.790 ± 0.005 inch) 
1M-4486  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  415.32 ± 0.08 mm (16.351 ± 0.002 inch)  17.48 ± 0.13 mm (.688 ± 0.005 inch) 
1P-7542  165.35 ± 0.05 mm (6.510 ± 0.002 inch)  167.79 ± 0.13 mm (6.606 ± 0.005 inch)  189.84 ± 0.05 mm (7.474 ± 0.002 inch)  14.55 ± 0.13 mm (.573 ± 0.005 inch)  187.81 ± 0.13 mm (7.394 ± 0.005 inch)  142.75 ± 0.50 mm (5.620 ± 0.020 inch) 
1S-0060  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  285.14 ± 0.05 mm (11.226 ± 0.002 inch)  17.25 ± 0.13 mm (.679 ± 0.005 inch) 
1S-0062  337.26 ± 0.05 mm (13.278 ± 0.002 inch)  362.00 ± 0.05 mm (14.252 ± 0.002 inch) 
1S-6496  406.45 ± 0.05 mm (16.002 ± 0.002 inch)  481.99 ± 0.05 mm (18.976 ± 0.002 inch)  15.88 ± 0.13 mm (.625 ± 0.005 inch) 
1S-6511  337.26 ± 0.05 mm (13.278 ± 0.002 inch)  362.00 ± 0.05 mm (14.252± 0.002 inch) 
1S-8544  215.95 ± 0.05 mm (8.502± 0.002 inch)  342.29 ± 0.08 mm (13.476 ± 0.003 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch) 
1S-9117  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  285.14 ± 0.05 mm (11.226 ± 0.002 inch)  17.25 ± 0.13 mm (.679 ± 0.005 inch) 
1T-1322  171.48 ± 0.25 mm (6.751 ± 0.001 inch)  351.90 ± 0.64 mm (13.8545 ± 0.0025 inch)  14.22 ± 0.25 mm (.560 ± 0.010 inch) 
1T-1363  236.93 ± 0.05 mm (9.328 ± 0.002 inch)  413.66 ± 0.05 mm (13.796 ± 0.002 inch)  19.05 ± 0.13 mm (.560 ± 0.005 inch) 
1T-1426  252.73 ± 0.05 mm (9.950 ± 0.002 inch)  350.42 ± 0.05 mm (13.796 ± 0.002 inch)  14.22 ± 0.25 mm (.560 ± 0.010 inch) 
1T-1635  284.38 ± 0.05 mm (11.196 ± 0.002 inch)  347.40 ± 0.05 mm (13.677 ± 0.002 inch)  17.36 ± 0.13 mm (.683 ± 0.005 inch) 
1T-1899  236.93 ± 0.05 mm (9.328 ± 0.002 inch)  366.04 ± 0.05 mm (14.411 ± 0.002 inch)  18.48 ± 0.13 mm (.728 ± 0.005 inch) 
1T-2001  252.73 ± 0.05 mm (9.950 ± 0.002 inch)  350.42 ± 0.05 mm (13.796 ± 0.002 inch)  14.22 ± 0.13 mm (.560 ± 0.005 inch) 
2M-3339  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  459.91 ± 0.13 mm (18.107 ± 0.002 inch)  532.79 ± 0.05 mm (20.976 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch) 
2M-3459  190.55 ± 0.05 mm (7.502 ± 0.002 inch)  285.14 ± 0.08 mm (11.226 ± 0.003 inch)  14.99 ± 0.13 mm (.5907 ± 0.005 inch) 
2M-4432  215.95 ± 0.05 mm (8.502 ± 0.002 inch)  354.99 ± 0.08 mm (13.976 ± 0.003 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch) 
2P-3586  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  415.32 ± 0.08 mm (16.351 ± 0.003 inch)  15.90 ± 0.13 mm (.626 ± 0.005 inch) 
2P-4385  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  437.54 ± 0.08 mm (17.226 ± 0.003 inch)  15.90 ± 0.13 mm (.626 ± 0.005 inch) 
2P-4510  254.05 ± 0.05 mm (10.002 ± 0.002 inch)  256.49 ± 0.13 mm (10.098 ± 0.005 inch)  310.54 ± 0.05 mm (12.226 ± 0.002 inch)  20.60 ± 0.13 mm (.811 ± 0.005 inch)  308.51 ± 0.08 mm (12.146 ± 0.003 inch)  263.53 ± 0.25 mm (10.375 ± 0.010 inch) 
2P-9158  237.050 ± 0.05 mm (9.333 ± 0.002 inch)  302.59 ± 0.05 mm (11.913 ± 0.002 inch) 
2P-9193  271.68 ± 0.05 mm (10.696 ± 0.002 inch)  365.76 ± 0.05 mm (14.400 ± 0.002 inch)  13.110 ± 0.25 mm (.516 ± 0.010 inch) 
2S-4922  317.55 ± 0.05 mm (12.502 ± 0.002 inch)  367.69 ± 0.08 mm (14.476 ± 0.003 inch)  15.87 ± 0.13 mm (.625± 0.005 inch) 
2S-5734  349.30 ± 0.05 mm (13.752 ± 0.002 inch)  434.37 ± 0.08 mm (17.101 ± 0.003 inch)  23.24 ± 0.13 mm (.915 ± 0.005 inch) 
3K-2283  273.10 ± 0.05 mm (10.752 ± 0.002 inch)  329.54 ± 0.08 mm (12.974 ± 0.003 inch)  20.83 ± 0.25 mm (.820 ± 0.010 inch) 
3P-0797  10  413.56 ± 0.05 mm (16.282 ± 0.002 inch)  438.20 ± 0.05 mm (17.252 ± 0.002 inch)  442.21 ± 0.13 mm (17.410 ± 0.005 inch) 
3P-0798  320.73 ± 0.05 mm (12.627 ± 0.002 inch)  367.69 ± 0.08 mm (14.476 ± 0.003 inch)  11.73 ± 0.13 mm (.462 ± 0.005 inch) 
3P-2685  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.094 ± 0.13 mm (14.098 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch) 
3P-2768  165.35 ± 0.05 mm (6.510 ± 0.002 inch)  167.79 ± 0.13 mm (6.606± 0.005 inch)  269.21 ± 0.05 mm (10.599 ± 0.002 inch)  18.26 ± 0.08 mm (.719 ± 0.003 inch)  267.18 ± 0.13 mm (10.519 ± 0.005 inch) 
3P-4264  238.18 ± 0.05 mm (9.377 ± 0.002 inch)  316.89 ± 0.08 mm (12.476 ± 0.003 inch)  16.99 ± 0.13 mm (.669 ± 0.005 inch)  263.65 ± 0.50 mm (10.380 ± 0.020 inch) 
3P-4265  196.90 ± 0.05 mm (7.752 ± 0.002 inch)  272.44 ± 0.08 mm (10.726 ± 0.003 inch)  11.18 ± 0.08 mm (.440 ± 0.003 inch)  223.8± 0.50 mm (8.811 ± 0.020 inch) 
3P-5170  196.90 ± 0.05 mm (7.752 ± 0.002 inch)  241.35 ± 0.05 mm (9.502 ± 0.002 inch)  16.66 ± 0.5 mm (.656 ± 0.020 inch)  196.900 ± 0.05 mm (7.752 ± 0.002 inch) 
3P-6787  187.38 ± 0.05 mm (7.377 ± 0.002 inch)  272.44 ± 0.08 mm (10.726 ± 0.003 inch)  15.11 ± 0.13 mm (.595 ± 0.005 inch)  223.8 ± 0.25 mm (8.811 ± 0.010 inch) 
3P-7473  330.45 ± 0.05 mm (13.010 ± 0.002 inch)  332.89 ± 0.13 mm (13.106 ± 0.005 inch)  405.74 ± 0.05 mm (15.974 ± 0.002 inch)  17.00 ± 0.13 mm (.699 ± 0.005 inch)  403.71 ± 0.13 mm (15.894 ± 0.005 inch)  354.0 ± 0.25 mm (13.937 ± 0.010 inch) 
3P-8217  387.15 ± 0.05 mm (15.242 ± 0.002 inch)  481.99 ± 0.05 mm (18.976 ± 0.002 inch)  19.810 ± 0.13 mm (.780 ± 0.005 inch)  406.4 ± 0.50 mm (16.000 ± 0.020 inch) 
3P-9366  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.09 ± 0.13 mm (12.606 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch) 
3P-9367  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
3S-0003  11  272.44 ± 0.13 mm (10.726 ± 0.005 inch)  310.54 ± 0.08 mm (12.226 ± 0.003 inch)  28.17 ± 0.13 mm (1.109 ± 0.005 inch)  263.53 ± 0.50 mm (10.375 ± 0.020 inch) 
3S-0988  238.18 ± 0.05 mm (9.377 ± 0.002 inch)  304.19 ± 0.08 mm (11.976 ± 0.003 inch)  17.09 ± 0.13 mm (.673 ± 0.005 inch)  265.51 ± 0.25 mm (223.8 ± 0.010 inch) 
3S-9975  11  253.39 ± 0.08 mm (9.976 ± 0.003 inch)  272.44 ± 0.05 mm (10.726 ± 0.003 inch)  28.84 ± .08 mm (.787 ± 0.005 inch)  223.8 ± 0.25 mm (8.811 ± 0.010 inch) 
3T-2637  388.25 ± 0.05 mm (15.285 ± 0.002 inch)  390.69 ± 0.13 mm (15.382 ± 0.005 inch)  481.99 ± 0.05 mm (18.976 ± 0.002 inch)  16.13 ± 0.13 mm (.635 ± 0.005 inch)  479.96 ± 0.13 mm (18.896 ± 0.005 inch) 
3T-3057  320.00 ± 0.05 mm (12.598 ± 0.002 inch)  319.34 ± 0.05 mm (12.572 ± 0.002 inch)  16.50 ± 0.25 mm (.650 ± 0.010 inch)  317.31 ± 0.13 mm (12.493 ± 0.005 inch)  207.31 ± 0.05 mm (8.162 ± 0.002 inch) 
3T-3064  319.34± 0.05 mm (12.572 ± 0.002 inch)  317.31 ± 0.13 mm (12.493 ± 0.005 inch)  132.0 ± 0.05 mm (5.197 ± 0.020 inch) 
3T-3090  460.42 ± 0.05 mm (18.127 ± 0.002 inch)  534.31 ± 0.13 mm (21.036 ± 0.005 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
3T-3670  142.50 ± 0.05 mm (5.610 ± 0.002 inch)  176.00 ± 0.05 mm (6.929 ± 0.002 inch) 
3T-3719  98.48 ± 0.05 mm (3.877 ± 0.002 inch)  283.34 ± 0.05 mm (11.155± 0.002 inch)  281.31 ± 0.13 mm (11.075 ± 0.005 inch)  126.98 ± 0.03 mm (4.999 ± 0.012 inch) 
3T-3720  284.00 ± 0.05 mm (11.181 ± 0.002 inch)  283.34 ± 0.05 mm (11.155 ± 0.002 inch)  14.15 ± 0.13 mm (.557 ± 0.005 inch)  281.31 ± 0.13 mm (11.075 ± 0.005 inch)  203.20 ± 0.05 mm (8.000 ± 0.002 inch) 
3T-3723  305.59 ± 0.05 mm (12.031 ± 0.002 inch)  303.56 ± 0.05 mm (11.951 ± 0.002 inch)  118.0 ± 0.25 mm (4.646 ± 0.010 inch) 
3T-3751  306.25 ± 0.05 mm (12.057 ± 0.002 inch)  305.59 ± 0.05 mm (12.031 ± 0.002 inch)  14.00 ± 0.13 mm (.551 ± 0.005 inch)  303.56 ± 0.05 mm (11.951 ± 0.002 inch)  208.41 ± 0.50 mm (8.205± 0.002 inch) 
3T-6795  238.32 ± 0.13 mm (9.383 ± 0.005 inch)  240.59 ± 0.13 mm (9.383 ± 0.005 inch)  279.34 ± 0.05 mm (10.998 ± 0.005 inch)  277.31 ± 0.13 mm (10.918 ± 0.005 inch) 
3T-7417  178.64 ± 0.05 mm (7.033 ± 0.002 inch)  237.52 ± 0.08 mm (9.351 ± 0.003 inch)  14.27 ± 0.13 mm (.562 ± 0.005 inch) 
3T-9204  184.40 ± 0.05 mm (7.260 ± 0.002 inch)  186.84 ± 0.13 mm (7.348 ± 0.005 inch)  243.59 ± 0.05 mm (9.590 ± 0.010 inch)  23.50 ± 0.25 mm (.925 ± 0.010 inch)  241.56 ± 0.13 mm (9.510 ± 0.005 inch) 
3T-9425  319.34 ± 0.05 mm (12.572 ± 0.002 inch)  317.31± 0.13 mm (12.493 ± 0.005 inch)  166.91 ± 0.10 mm (6.571 ± 0.004 inch) 
4M-1598  406.45 ± 0.05 mm (16.002 ± 0.002 inch)  481.99 ± 0.08 mm (18.976 ± 0.003 inch)  15.88 ± 0.13 mm (.625 ± 0.005 inch) 
4M-8868  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  253.39 ± 0.08 mm (9.976 ± 0.003 inch)  17.48 ± 0.13 mm (.688 ± 0.005 inch) 
4S-5943  255.63 ± 0.13 mm (10.064 ± 0.002 inch)  304.19 ± 0.08 mm (11.976 ± 0.003 inch)  17.07 ± 0.08 mm (.672 ± 0.003 inch) 
4S-6707  317.55 ± 0.05 mm (12.502 ± 0.002 inch)  350.22 ± 0.08 mm (13.788 ± 0.002 inch)  24.21 ± 0.13 mm (.953 ± 0.005 inch) 
4S-8687  203.25 ± 0.05 mm (8.002± 0.002 inch)  253.39 ± 0.08 mm (9.976 ± 0.003 inch)  15.88 ± 0.13 mm (.625 ± 0.005 inch)  213.51 ± 0.25 mm (8.406 ± 0.010 inch) 
5S-0923  136.58 ± 0.05 mm (5.377 ± 0.002 inch)  253.39 ± 0.08 mm (9.976 ± 0.003 inch)  13.84 ± 0.13 mm (.545 ± 0.005 inch) 
5S-1068  422.73 ± 0.05 mm (16.643 ± 0.002 inch)  481.99 ± 0.08 mm (18.976 ± 0.003 inch)  15.88 ± 0.13 mm (.625 ± 0.005 inch)  406.4 ± 0.25 mm (16.000 ± 0.010 inch) 
5S-3586  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  291.49 ± 0.08 mm (11.476 ± 0.003 inch)  12.07 ± 0.13 mm (.475 ± 0.005 inch) 
5S-3593  196.90 ± 0.05 mm (7.752 ± 0.002 inch)  272.44 ± 0.08 mm (10.726 ± 0.003 inch)  15.11 ± 0.13 mm (.595 ± 0.005 inch) 
5S-3612  208.41 ± 0.05 mm (8.205 ± 0.002 inch)  255.63 ± 0.05 mm (10.064 ± 0.002 inch) 
5S-3665  178.64 ± 0.05 mm (7.033 ± 0.002 inch)  241.35 ± 0.05 mm (9.502 ± 0.002 inch) 
5S-3739  177.85 ± 0.05 mm (7.002 ± 0.002 inch)  253.39 ± 0.08 mm (9.976 ± 0.003 inch)  18.23 ± 0.13 mm (.718 ± 0.005 inch)  190.0 ± 0.25 mm (7.500 ± 0.010 inch) 
5S-4471  379.02 ± 0.05 mm (14.922 ± 0.002 inch)  415.32 ± 0.08 mm (16.351 ± 0.003 inch)  17.48 ± 0.13 mm (.688 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
6I-9507  237.05 ± 0.05 mm (9.333 ± 0.002 inch)  315.21 ± 0.05 mm (12.410 ± 0.002 inch)  13.49 ± 0.25 mm (.531 ± 0.010 inch) 
6I-9508  271.68 ± 0.05 mm (10.696 ± 0.002 inch)  365.76 ± 0.05 mm (14.400 ± 0.002 inch)  12.72 ± 0.25 mm (.501 ± 0.010 inch) 
6I-8166  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  521.61 ± 0.13 mm (20.536 ± 0.005 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch) 
6T-0526  270.25 ± 0.05 mm (10.640 ± 0.002 inch)  272.69 ± 0.13 mm (10.736 ± 0.005 inch)  310.54 ± 0.05 mm (12.226 ± 0.002 inch)  12.67 ± 0.13 mm (.499 ± 0.005 inch)  308.51 ± 0.13 mm (12.146 ± 0.005 inch)  318.00 ± 0.05 mm (12.520 ± 0.002 inch) 
6T-2075  355.85 ± 0.05 mm (14.010 ± 0.002 inch)  358.29 ± 0.13 mm (14.106 ± 0.005 inch)  432.73 ± 0.05 mm (17.037 ± 0.002 inch)  25.65 ± 0.08 mm (1.010 ± 0.005 inch)  430.70 ± 0.13 mm (16.957 ± 0.005 inch) 
6T-2602  355.85 ± 0.05 mm (14.010 ± 0.002 inch)  358.29 ± 0.13 mm (14.106 ± 0.005 inch)  432.73 ± 0.05 mm (17.037 ± 0.002 inch)  25.65 ± 0.08 mm (1.010 ± 0.005 inch)  430.70 ± 0.13 mm (16.957 ± 0.005 inch) 
6T-6987  238.32 ± 0.13 mm (9.383 ± 0.005 inch)  240.59 ± 0.13 mm (9.472 ± 0.005 inch)  279.34 ± 0.13 mm (10.998 ± 0.005 inch)  23.46 ± 0.13 mm (.924 ± 0.005 inch)  277.31 ± 0.13 mm (10.918 ± 0.005 inch) 
6Y-1321  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  16.50 ± 0.13 mm (.650 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch) 
6Y-2646  184.40 ± 0.05 mm (7.260 ± 0.002 inch)  186.84 ± 0.13 mm (7.348 ± 0.005 inch)  243.59 ± 0.05 mm (9.590 ± 0.002 inch)  23.52508 mm (.925 ± 0.010 inch)  241.56 ± 0.13 mm (9.510 ± 0.005 inch) 
6Y-2817  441.52 ± 0.05 mm (17.383 ± 0.002 inch)  443.96 ± 0.13 mm (17.479 ± 0.005 inch)  532.79 ± 0.05 mm (20.976 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.005 inch)  530.76 ± 0.13 mm (20.896 ± 0.005 inch)  454.0± 0.50 mm (17.874 ± 0.020 inch) 
6Y-3298  290.25 ± 0.05 mm (11.427± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  15.50 ± 0.13 mm (.610 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.50 mm (11.181 ± 0.020 inch) 
6Y-3481  267.06 ± 0.05 mm (9.843 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  20.00 ± 0.13 mm (.787 ± 0.005 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  349.30 ± 0.05 mm (13.752 ± 0.002 inch) 
6Y-3482  250.00 ± 0.05 mm (9.843 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.60 ± 0.13 mm (.772 ± 0.005 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  349.30 ± 0.05 mm (13.752 ± 0.002 inch) 
6Y-5877  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  405.74 ± 0.05 mm (15.974 ± 0.002 inch)  17.00 ± 0.08 mm (.669 ± 0.005 inch)  403.71 ± 0.13 mm (15.894 ± 0.005 inch)  354.0 ± 0.50 mm (13.937 ± 0.020 inch) 
6Y-5951  441.52 ± 0.05 mm (17.383 ± 0.002 inch)  443.96 ± 0.13 mm (17.479 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  20.00 ± 0.08 mm (.787 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
6Y-6212  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
6Y-6600  350.82 ± 0.05 mm (13.815 ± 0.002 inch)  366.42 ± 0.05 mm (14.426 ± 0.002 inch)  29.0 ± 0.50 mm (11.772 ± 0.020 inch) 
6Y-7199  461.28 ± 0.05 mm (18.161 ± 0.002 inch)  498.66 ± 0.05 mm (19.632 ± 0.002 inch)  18.50 ± 0.13 mm (.728 ± 0.003 inch)  435.5 ± 0.50 mm (17.146 ± 0.020 inch) 
7G-0730  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  15.50 ± 0.13 mm (.610 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.50 mm (11.181 ± 0.020 inch) 
7G-0731  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  374.04 ± 0.05 mm (14.726 ± 0.002 inch)  19.65 ± 0.13 mm (.774 ± 0.005 inch)  372.01 ± 0.13 mm (14.646 ± 0.005 inch)  320.0 ± 0.25 mm (12.598 ± 0.020 inch) 
7G-0732  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  382.34 ± 0.05 mm (15.053 ± 0.002 inch)  25.00 ± 0.13 mm (.984 ± 0.005 inch)  380.01 ± 0.13 mm (14.973 ± 0.005 inch)  320.0 ± 0.25 mm (12.598 ± 0.010 inch) 
7G-1223  180.25 ± 0.05 mm (7.096 ± 0.002 inch)  182.69 ± 0.13 mm (7.193 ± 0.005inch)  202.34 ± 0.05 mm (7.966 ± 0.002 inch)  200.31 ± 0.13 mm (7.886 ± 0.005 inch) 
7G-2115  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  382.34 ± 0.05 mm (15.053 ± 0.002 inch)  35.94 ± 0.13 mm (1.415 ± 0.005 inch)  380.31 ± 0.13 mm (14.973 ± 0.005 inch)  320.0 ± 0.25 mm (12.598 ± 0.010 inch) 
7G-2117  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  374.04 ± 0.05 mm (14.726 ± 0.002 inch)  30.90 ± 0.13 mm (1.217 ± .005 inch)  372.01 ± 0.13 mm (14.646 ± 0.005 inch)  320.0 ± 0.25 mm (12.598 ± 0.010 inch) 
7G-3356  375.26 ± 0.05 mm (14.774 ± 0.002 inch)  377.70 ± 0.13 mm (14.870 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.5 ± 0.50 mm (13.966 ± 0.020 inch) 
7G-3707  225.25 ± 0.05 mm (8.868 ± 0.002 inch)  227.69 ± 0.13 mm (8.964 ± 0.005 inch)  279.34 ± 0.05 mm (10.998 ± 0.002 inch)  277.13 ± 0.13 mm (10.918 ± 0.005 inch)  233.0 ± 0.25 mm (9.173 ± 0.010 inch) 
7G-3708  238.15 ± 0.05 mm (9.376 ± 0.002 inch)  240.59 ± 0.13 mm (9.472 ± 0.005 inch)  270.43 ± 0.05 mm (10.647 ± 0.002 inch)  268.40 ± 0.13 mm (10.557 ± 0.005 inch) 
7G-3797  177.85 ± 0.05 mm (7.002 ± 0.002 inch)  285.14 ± 0.08 mm (11.226 ± 0.003 inch)  17.24 ± 0.13 mm (.679 ± 0.005 inch)  209.55 ± 0.25 mm (8.250 ± 0.010 inch) 
7G-5107  159.00 ± 0.05 mm (6.260 ± 0.002 inch)  161.44 ± 0.13 mm (6.356 ± 0.005 inch)  205.72± 0.05 mm (8.009 ± 0.002 inch)  20.5 ± 0.08 mm (.807 ± 0.010 inch)  203.69 ± 0.13 mm (8.019 ± 0.005 inch)  146.0 ± 0.50 mm (5.748 ± 0.020 inch) 
7G-5738  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
7G-5739  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.25 mm (14.000 ± 0.010 inch) 
7G-5749  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
7G-5750  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
7G-5849  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
7G-5850  370.255 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
7G-7614  11  86.75 ± 0.05 mm (3.415 ± 0.002 inch)  136.34 ± 0.05 mm (5.368 ± 0.002 inch)  48.00 ± 0.25 mm (1.890 ± 0.010 inch)  77.5 ± 0.25 mm (3.051 ± 0.010 inch) 
7G-7724  139.95 ± 0.05 mm (5.510 ± 0.002 inch)  142.39 ± 0.13 mm (5 5.606 ± 0.005 inch)  229.34 ± 0.05 mm (9.029 ± 0.002 inch)  16.22 ± 0.13 mm (.639 ± 0.005 inch)  227.31 ± 0.13 mm (8.949 ± 0.005 inch) 
7G-7742  419.35 ± 0.05 mm (16.510 ± 0.002 inch)  422.05 ± 0.13 mm (16.6164 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  17.00 ± 0.13 mm (.699 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
7G-7745  450.80 ± 0.05 mm (20.394 ± 0.002 inch)  453.24 ± 0.13 mm (17.844 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  20.00 ± 0.13 mm (.787 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
7G-9120  11  86.75 ± 0.05 mm (3.415 ± 0.002 inch)  136.34 ± 0.05 mm (5.368 ± 0.002 inch)  41.00 ± 0.25 mm (1.614 ± 0.010 inch)  134.31 ± 0.13 mm (5..28 ± 0.005 inch)  62.0 ± 0.50 mm (2.44 ± 0.020 inch) 
7G-9261  139.95 ± 0.05 mm (5.510 ± 0.002 inch)  142.39 ± 0.13 mm (5.606 ± 0.002 inch)  177.34 ± 0.05 mm (6.982 ± 0.002 inch)  18.00 ± 0.25 mm (.709 ± 0.010 inch)  175.31 ± 0.13 mm (6.902 ± 0.005 inch) 
7M-1249  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  532.79 ± 0.08 mm (20.976 ± 0.003 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
7M-1253  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  520.09 ± 0.08 mm (20.476 ± 0.003 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
7M-8395  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  507.39 ± 0.05 mm (19.976 ± 0.003 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
7M-8453  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  405.79 ± 0.08 mm (15.976 ± 0.003 inch)  17.48 ± 0.13 mm (.688 ± 0.005 inch) 
7M-9940  222.76 ± 0.05 mm (8.770 ± 0.002 inch)  285.42 ± 0.08 mm (11.237 ± 0.003 inch)  15.88 ± 0.08 mm (.625 ± 0.003 inch) 
7S-2893  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  253.39 ± 0.08 mm (9.976 ± 0.003 inch)  12.70 ± 0.13 mm (.500 ± 0.005 inch)  188.98 ± 0.25 mm (7.440 ± 0.010 inch) 
7S-4494  208.41 ± 0.05 mm (8.205 ± 0.002 inch)  255.63 ± 0.05 mm (10.064 ± 0.002 inch)  200.25 ± 0.25 mm (7.884 ± 0.010 inch) 
7S-4543  331.83 ± 0.05 mm (13.064 ± 0.002 inch)  374.04 ± 0.08 mm (14.726 ± 0.002 inch)  13.99 ± 0.13 mm (.551 ± 0.005 inch)  317.25 ± 0.25 mm (12.490 ± 0.010 inch) 
7S-6844  374.70 ± 0.05 mm (14.752 ± 0.002 inch)  434.37 ± 0.08 mm (17.101 ± 0.003 inch)  21.08 ± 0.13 mm (.830 ± 0.005 inch)  355.65 ± 0.50 mm (14.002 ± 0.002 inch) 
7S-8482  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  253.39± 0.05 mm (9.976 ± 0.003 inch)  15.88 ± 0.13 mm (.625 ± 0.005 inch)  213.51 ± 0.13 mm (8.406 ± 0.005 inch) 
7T-1999  271.69 ± 0.05 mm (10.696 ± 0.002 inch)  413.65 ± 0.05 mm (16.285 ± 0.002 inch)  23.00 ± 0.13 mm (.906 ± 0.005 inch)  299.0 ± 0.50 mm (11.772 ± 0.005 inch) 
7T-3132  11  202.54 ± 0.05 mm (7.974 ± 0.002 inch)  215.24 ± 0.05 mm (8.474 ± 0.002 inch)  19.46 ± 0.25 mm (.748 ± 0.010 inch)  213.21 ± 0.13 mm (8.394 ± 0.005 inch)  177.8 ± 0.13 mm (7.000 ± 0.005 inch) 
7T-3133  184.05 ± 0.05 mm (7.260 ± 0.002 inch)  186.84 ± 0.13 mm (7.348 ± 0.005 inch)  215.14 ± 0.05 mm (8.474 ± 0.002 inch)  19.00 ± 0.25 mm (.748 ± 0.010 inch)  213.21 ± 0.13 mm (8.394 ± 0.005 inch) 
7T-5334  265.81 ± 0.05 mm (10.465 ± 0.002 inch)  268.25 ± 0.13 mm (10.561 ± 0.005 inch)  310.54 ± 0.05 mm (12.226 ± 0.002 inch)  16.65 ± 0.13 mm (.656 ± 0.005 inch)  308.51 ± 0.13 mm (12.146 ± 0.005 inch) 
7T-9647  71.42 ± 0.05 mm (2.812 ± 0.002 inch)  142.88 ± 0.05 mm (5.625 ± 0.002 inch) 
8E-0915  406.60 ± 0.05 mm (16.008 ± 0.002 inch)  409.04 ± 0.13 mm (16.104 ± 0.005 inch)  492.34 ± 0.05 mm (19.383 16.474 ± 0.002 inch)  19.65 ± 0.13 mm (.774 ± 0.005 inch)  490.31 ± 0.13 mm (19.304 ± 0.005 inch) 
8E-4295  271.69 ± 0.05 mm (10.696 ± 0.002 inch)  384.81 ± 0.05 mm (15.150 ± 0.002 inch)  16.00 ± 0.13 mm (.630 ± 0.005 inch)  299.0 ± 0.50 mm (11.772 ± 0.020 inch) 
8E-4583  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.09 ± 0.13 mm (14.098 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch) 
8E-4584  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.09 ± 0.13 mm (14.098 ± 0.005 inch)  393.34 ± 0.05 mm (15.486 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  391.31 ± 0.13 mm (15.406 ± 0.005 inch) 
8E-5059  462.25± 0.05 mm (18.199 ± 0.002 inch)  464.69 ± 0.13 mm (18.295 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  21.50 ± 0.08 mm (.846 ± 0.003 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
8E-5060  419.35 ± 0.05 mm (16.510 ± 0.002 inch)  422.05 ± 0.13 mm (16.616 ± 0.005 inch)  520.04 ± 0.05 mm (206.474 ± 0.002 inch)  21.50 ± 0.13 mm (.846 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
8E-5620  448.25 ± 0.05 mm (17.648 ± 0.002 inch)  450.69 ± 0.13 mm (17.744 ± 0.005 inch)  532.79 ± 0.05 mm (20.976 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.005 inch)  530.76 ± 0.13 mm (20.896 ± 0.005 inch)  454.0 ± 0.50 mm (17.874 ± 0.020 inch) 
8E-5630  441.52 ± 0.05 mm (17.383 ± 0.002 inch)  443.96 ± 0.13 mm (17.479 ± 0.005 inch)  532.79 ± 0.05 mm (20.976 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.005 inch)  530.76 ± 0.13 mm (20.896 ± 0.005 inch)  454.0 ± 0.50 mm (78.874 ± 0.020 inch) 
8E-6630  238.32 ± 0.13 mm (9.383 ± 0.002 inch)  240.59 ± 0.13 mm (9.472 ± 0.005 inch)  279.34 ± 0.13 mm (10.998 ± 0.005 inch)  17.93 ± 0.13 mm (.706 ± 0.005 inch)  277.31 ± 0.13 mm (10.918 ± 0.005 inch) 
8E-9599  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  15.01 ± 0.13 mm (.591 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.50 mm (11.181 ± 0.020 inch) 
8M-8649  321.71 ± 0.05 mm (12.902 ± 0.002 inch)  367.69 ± 0.08 mm (14.476 ± 0.003 inch)  19.51 ± 0.13 mm (.768 ± 0.005 inch)  317.55 ± 0.25 mm (12.502 ± 0.010 inch) 
8M-8650  317.55 ± 0.05 mm (12.502 ± 0.002 inch)  367.69 ± 0.08 mm (14.476 ± 0.003 inch)  16.51 ± 0.08 mm (.650 ± 0.003 inch) 
8P-0868  387.40 ± 0.05 mm (15.252 ± 0.002 inch)  434.37 ± 0.08 mm (17.101 ± 0.003 inch)  21.08 ± 0.13 mm (.830 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
8P-1892  290.25 ± 0.05 mm (11.427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  30.05 ± 0.08 mm (1.183 ± 0.003 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.181 ± 0.010 inch) 
8P-1905  462.60 ± 0.05 mm (18.252 ± 0.002 inch)  491.29 ± 0.05 mm (19.342 ± 0.002 inch) 
8P-1906  362.00 ± 0.05 mm (14.252 ± 0.002 inch)  405.79 ± 0.08 mm (15.976 ± 0.003 inch)  13.51 ± 0.13 mm (.532 ± 0.003 inch)  355.6 ± 0.50 mm (14.000 ± 0.020 inch) 
8P-3512  11  237.51 ± 0.05 mm (9.351 ± 0.005 inch)  272.44 ± 0.08 mm (10.726 ± 0.003 inch)  24.84 ± 0.13 mm (.978 ± 0.005 inch)  200.02 ± 0.13 mm (7.875 ± 0.005 inch) 
8P-4520  311.20 ± 0.05 mm (12.252 ± 0.002 inch)  374.04 ± 0.08 mm (14.726 ± 0.003 inch)  13.99 ± 0.13 mm (.551 ± 0.005 inch)  317.25 ± 0.25 mm (12.490 ± 0.010 inch) 
8P-4735  460.42 ± 0.05 mm (18.127 ± 0.002 inch)  507.39 ± 0.08 mm (20.476 ± 0.002 inch)  14.94 ± 0.13 mm (.625 ± 0.003 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
8P-7000  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  520.09 ± 0.08 mm (20.476 ± 0.003 inch)  15.08 ± 0.08 mm (.625 ± 0.003 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
8P-8565  236.93 ± 0.05 mm (9.328 ± 0.002 inch)  329.67 ± 0.05 mm (12.979 ± 0.002 inch)  18.00 ± 0.13 mm (.709 ± 0.005 inch)  262.0± 0.13 mm (10.315 ± 0.005 inch) 
8P-9507  290.25± 0.05 mm (11.427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  19.45 ± 0.13 mm (.766 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.181 ± 0.010 inch) 
8S-3510  331.83 ± 0.05 mm (13.064 ± 0.002 inch)  367.69 ± 0.08 mm (14.476 ± 0.003 inch)  11.43 ± 0.13 mm (.450 ± 0.005 inch)  317.55 ± 0.25 mm (12.502 ± 0.010 inch) 
8S-9004  292.15 ± 0.05 mm (11.502 ± 0.002 inch)  374.04 ± 0.08 mm (14.726 ± 0.003 inch)  15.72 ± 0.13 mm (.619 ± 0.005 inch)  317.25 ± 0.25 mm (12.490 ± 0.010 inch) 
9G-0280  270.25 ± 0.05 mm (10.640 ± 0.002 inch)  272.69 ± 0.13 mm (10.736 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  19.45 ± 0.13 mm (.766 ± 0.005 inch)  337.31 ± 0.13 mm (13.280± 0.005 inch)  284.0 ± 0.25 mm (11.181 ± 0.010 inch) 
9G-0285  300.25 ± 0.05 mm (11.821 ± 0.002 inch)  302.69 ± 0.13 mm (11.917 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  23.57 ± 0.13 mm (.928 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.181 ± 0.010 inch) 
9G-0325  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  374.04 ± 0.05 mm (14.726 ± 0.002 inch)  14.60 ± 0.13 mm (.575 ± 0.005 inch)  372.01 ± 0.13 mm (14.646 ± 0.005 inch)  320.0 0 ± 0.50 mm (12.598 ± 0.020 inch) 
9G-0338  292.25 ± 0.05 mm (11.506 ± 0.002 inch)  294.69 ± 0.13 mm (11.602 ± 0.005 inch)  374.04 ± 0.05 mm (14.726 ± 0.002 inch)  15.71 ± 0.13 mm (.619 ± 0.005 inch)  372.01 ± 0.13 mm (14.646 ± 0.005 inch)  320.0 ± 0.50 mm (12.598 ± 0.020 inch) 
9G-0339  330.25 ± 0.05 mm (13.002 ± 0.002 inch)  332.69 ± 0.13 mm (13.098 ± 0.005 inch)  367.34 ± 0.05 mm (16.474 ± 0.002 inch)  14.12 ± 0.13 mm (.556 ± 0.005 inch)  365.31 ± 0.13 mm (14.382 ± 0.005 inch)  320.0 ± 0.50 mm (12.598 ± 0.020 inch) 
9G-2001  12  253.79 ± 0.05 mm (9.992 ± 0.002 inch)  305.59 ± 0.05 mm (12.031 ± 0.002 inch)  34.0 ± 0.5 mm (1.339 ± 0.020 inch)  303.56 ± 0.05 mm (11.951 ± 0.002 inch)  190.0 ± 0.50 mm (7.480 ± 0.020 inch) 
9G-2471  11  104.34 ± 0.05 mm (4.108 ± 0.002 inch)  175.34 ± 0.05 mm (6.903 ± 0.002 inch)  64.06 ± 0.25 mm (2.522 ± 0.010 inch)  139.0 ± 0.50 mm (5.472 ± 0.020 inch) 
9G-4229  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  15.01 ± 0.13 mm (.591 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.181 ± 0.010 inch) 
9G-5818  11  104.34 ± 0.05 mm (4.108 ± 0.002 inch)  175.34 ± 0.05 mm (6.903 ± 0.002 inch)  47.50 ± 0.25 mm (1.870 ± 0.010 inch)  139.0 ± 0.50 mm (5.472 ± 0.020 inch) 
9G-6464  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
9G-7442  406.60 ± 0.05 mm (16.008 ± 0.002 inch)  409.04 ± 0.13 mm (16.104 ± 0.005 inch)  481.99 ± 0.05 mm (18.976 ± 0.002 inch)  19.65 ± 0.13 mm (.774 ± 0.005 inch)  479.96 ± 0.13 mm (18.896 ± 0.005 inch) 
9G-7460  473.15 ± 0.05 mm (18.628 ± 0.002 inch)  475.59 ± 0.13 mm (18.724 ± 0.005 inch)  532.79 ± 0.05 mm (20.976 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.003 inch)  530.76 ± 0.13 mm (20.896 ± 0.005 inch)  454.0 ± 0.50 mm (17.874 ± 0.020 inch) 
9G-7461  441.52 ± 0.05 mm (17.383 ± 0.002 inch)  443.96 ± 0.13 mm (17.479 ± 0.005 inch)  532.79 ± 0.05 mm (20.976 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.005 inch)  530.76 ± 0.13 mm (20.896 ± 0.005 inch)  454.0 ± 0.50 mm (17.874 ± 0.020 inch) 
9G-8981  111.38 ± 0.05 mm (4..285 ± 0.002 inch)  113.82 ± 0.13 mm (4.481 ± 0.005 inch)  142.22 ± 0.05 mm (5.599 ± 0.002 inch)  22.00 ± 0.05 mm (.866 ± 0.003 inch)  140.19 ± 0.13 mm (5.519 ± 0.005 inch) 
9G-9461  224.18 ± 0.05 mm (8.826 ± 0.002 inch)  384.64 ± 0.05 mm (15.143 ± 0.002 inch)  12.00 ± 0.25 mm (.472 ± 0.010 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch) 
9G-9518  27305 ± 0.05 mm (10.750 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.6 ± 0.13 mm (.772 ± 0.005 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch) 
9G-9888  285.75 ± 0.05 mm (11.250 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  56.00 ± 0.25 mm (2.205 ± 0.010 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch) 
9G-9892  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  145.08 ± 0.03 mm (5.712 ± 0.012 inch) 
9H-5233  460.43 ± 0.05 mm (18.127 ± 0.002 inch)  452.42 ± 0.08 mm (17.812 ± 0.005 inch)  520.09 ± 0.08 mm (20.476 ± 0.003 inch)  15.88 ± 0.08 mm (.625 ± 0.003 inch)  452.42 ± 0.25 mm (17.812 ± 0.010 inch) 
9M-4395  381.05 ± 0.05 mm (15.002 ± 0.002 inch)  419.15 ± 0.05 mm (16.502 ± 0.002 inch) 
9N-4147  448.25 ± 0.05 mm (17.648 ± 0.002 inch)  450.69 ± 0.13 mm (17.744 ± 0.005 inch)  432.79 ± 0.05 mm (20.976 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.005 inch)  530.76 ± 0.13 mm (20.896 ± 0.005 inch)  545.0 ± 0.50 mm (17.874 ± 0.020 inch) 
9P-5363  317.55 ± 0.05 mm (12.502 ± 0.002 inch)  377.40 ± 0.08 mm (14.858 ± 0.003 inch)  16.515 ± 0.13 mm (.650 ± 0.005 inch) 
9P-6799  158.75 ± 0.05 mm (6.250 ± 0.002 inch)  161.19 ± 0.13 mm (6.346 ± 0.005 inch)  202.34 ± 0.05 mm (7.996 ± 0.002 inch)  200.31 ± 0.13 mm (7.886 ± 0.005 inch)  180.0 ± 0.25 mm (7.087 ± 0.010 inch) 
9P-6800  180.25 ± 0.05 mm (7.096 ± 0.002 inch)  182.69 ± 0.13 mm (7.1936 ± 0.005 inch)  212.34 ± 0.05 mm (8.360 ± 0.002 inch)  210.31 ± 0.13 mm (8.280 ± 0.005 inch) 
9S-6951  89.15 ± 0.05 mm (3.510 ± 0.002 inch)  91.59 ± 0.13 mm (3.606 ± 0.005 inch)  123.16 ± 0.05 mm (4.849 ± 0.002 inch)  13.89 ± 0.13 mm (.547 ± 0.005 inch)  121.13 ± 0.13 mm (4.769 ± 0.005 inch) 
9U-9012  271.69 ± 0.05 mm (10.696 ± 0.002 inch)  384.81 ± 0.05 mm (15.150 ± 0.002 inch)  16.0 ± 0.13 mm (.630 ± 0.005 inch)  299.0 ± 0.50 mm (11.772 ± 0.020 inch) 
9U-9827  250.00 ± 0.05 mm (9.843 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.60 ± 0.13 mm (.772 ± 0.005 inch)  346.61 ± 0.13 mm (16.646 ± 0.005 inch)  349.30 ± 0.50 mm (13.752 ± 0.020 inch) 
9U-9832  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  136.0 ± 0.50 mm (5.354 ± 0.020 inch) 
9U-9836  214.18 ± 0.05 mm (8.432 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  12.0 ± 0.25 mm (.472 ± 0.010 inch)  346.41 ± 0.13 mm (13.646 ± 0.005 inch) 
9U-9843  448.25 ± 0.05 mm (17.648 ± 0.002 inch)  450.69 ± 0.13 mm (17.744 ± 0.005 inch)  551.34 ± 0.05 mm (21.706 ± 0.002 inch)  25.65 ± 0.13 mm (1.010 ± 0.005 inch)  549.31 ± 0.13 mm (21.626 ± 0.005 inch)  454.0 ± 0.50 mm (17.874 ± 0.020 inch) 
9W-2988  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  23.57 ± 0.13 mm (.928 ± 0.005 inch)  337.31 16.41 ± 0.13 mm (13.280 ± 0.005 inch)  284.00 ± 0.05 mm (11.181 ± 0.002 inch) 
9W-3897  273.055 ± 0.05 mm (10.750 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.60 ± 0.13 mm (.772 ± 0.005 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  349.30 ± 0.05 mm (13.752 ± 0.002 inch) 
9W-3899  285.75 ± 0.05 mm (11.250 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.00 ± 0.13 mm (.748 ± 0.005 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  349.30 ± 0.05 mm (13.752 ± 0.002 inch) 
9W-6098  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.08 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
9W-6099  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
9W-6186  281.37 ± 0.05 mm (12.510 ± 0.002 inch)  283.81 ± 0.13 mm (12.606 ± 0.005 inch)  339.34 ± 0.05 mm (16.474 ± 0.002 inch)  18.95 ± 0.08 mm (.746 ± 0.003 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.00 ± 0.25 mm (11.181 ± 0.020 inch) 
9W-6188  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  23.57 ± 0.13 mm (.928 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.00 ± 0.05 mm (11.181 ± 0.002 inch) 
9W-6415  290.25 ± 0.05 mm (11427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  15.50 ± 0.13 mm (.610 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.50 mm (11.181 ± 0.020 inch) 
9W-7039  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  408.92 ± 0.05 mm (16.099 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.003 inch)  406.89 ± 0.13 mm (16.019 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
9W-7040  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
9W-7458  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.003 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
9W-8898  419.35 ± 0.05 mm (16.510 ± 0.002 inch)  422.05 ± 0.13 mm (16.616 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  21.50 ± 0.08 mm (.846 ± 0.010 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
9W-9148  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  16.5 ± 0.13 mm (.650 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.50 mm (11.181 ± 0.020 inch) 
9W-9158  283.34 ± 0.05 mm (11.155 ± 0.002 inch)  281.31 ± 0.13 mm (11.075 ± 0.005 inch)  98.48 ± 0.05 mm (3.877 ± 0.002 inch) 
9W-9159  203.20 ± 0.05 mm (8.000 ± 0.002 inch)  283.34 ± 0.05 mm (11.155 ± 0.002 inch)  28.00 ± 0.13 mm (1.102 ± 0.005 inch)  281.31 ± 0.13 mm (11.075 ± 0.005 inch)  284.00 ± 0.05 mm (11.181 ± 0.002 inch) 
105-9268  450.80 ± 0.05 mm (17.748 ± 0.002 inch)  453.24 ± 0.13 mm (17.844 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  20.00 ± 0.13 mm (.787 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
105-9269  419.35 ± 0.05 mm (16.510 ± 0.002 inch)  422.05 ± 0.13 mm (16.616 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  17.00 ± 0.13 mm (.669 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
110-7540  238.15 ± 0.05 mm (9.376 ± 0.002 inch)  240.59 ± 0.13 mm (9.472 ± 0.005 inch)  279.34 ± 0.05 mm (10.998 ± 0.002 inch)  277.31 ± 0.13 mm (10.918 ± 0.005 inch) 
112-4507  335.05 ± 0.05 mm (14.577 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  21.80 ± 0.13 mm (.858 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.6 ± 0.50 mm (14.000 ± 0.020 inch) 
112-4508  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  408.92 ± 0.05 mm (16.099 ± 0.002 inch)  21.74 ± 0.13 mm (.856 ± 0.005 inch)  406.89 ± 0.13 mm (16.019 ± 0.005 inch)  355.6 ± 0.50 mm (14.000 ± 0.020 inch) 
115-5568  290.25 ± 0.05 mm (11.427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  337.37 ± 0.13 mm (13.280 ± 0.005 inch) 
123-4881  473.15 0 ± 0.05 mm (18.628 ± 0.002 inch)  475.59 ± 0.13 mm (18.724 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  20.00 ± 0.13 mm (.787 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
123-5255  461.28 ± 0.05 mm (18.161 ± 0.002 inch)  475.32 ± 0.05 mm (18.713 ± 0.002 inch)  435.0 ± 0.50 mm (17.126 ± 0.020 inch) 
128-3140  250.00 ± 0.05 mm (9.834 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.60 ± 0.25 mm (.787 ± 0.010 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  349.30 ± 0.50 mm (13.752 ± 0.020 inch) 
128-3142  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  139.62 ± 0.03 mm (5.497 ± 0.012 inch) 
128-3145  349.30 ± 0.05 mm (17.748 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  20.00 ± 0.25 mm (.787 ± 0.010 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  267.06 ± 0.50 mm (10.514 ± 0.002 inch) 
128-3146  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  145.08 ± 0.03 mm (5.712 ± 0.012 inch) 
128-3444  273.05 ± 0.05 mm (10.750 ± 0.002 inch)  348.64 ± 0.05 mm (13.726 ± 0.002 inch)  19.06 ± 0.25 mm (.772 ± 0.010 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch) 
130-8412  308.42 ± 0.05 mm (12.143 ± 0.002 inch)  310.86 ± 0.13 mm (12.239 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  23.57 ± 0.13 mm (.928 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.181 ± 0.010 inch) 
132-4451  350.75 ± 0.05 mm (13.809 ± 0.002 inch)  366.04 ± 0.05 mm (14.411 ± 0.0016 inch)  13.75 ± 0.25 mm (.541 ± 0.010 inch)  299.0 ± 0.50 mm (11.772 ± 0.020 inch) 
132-9643  317.75 ± 0.05 mm (12.510 ± 0.002 inch)  320.19 ± 0.13 mm (12.606 ± 0.005 inch)  382.34 ± 0.05 mm (15.053 ± 0.002 inch)  12.00 ± 0.25 mm (.472 ± 0.010 inch)  380.31 ± 0.13 mm (14.973 ± 0.005 inch) 
137-1618  270.25 ± 0.05 mm (10.640 ± 0.002 inch)  272.69 ± 0.13 mm (10.736 ± 0.005 inch)  310.54 ± 0.05 mm (12.226 ± 0.002 inch)  308.51 ± 0.13 mm (12.146 ± 0.005 inch) 
137-1619  270.25 ± 0.05 mm (10.640 ± 0.002 inch)  272.69 ± 0.13 mm (10.736 ± 0.005 inch)  310.54 ± 0.05 mm (12.226 ± 0.002 inch)  308.51 ± 0.13 mm (12.146 ± 0.005 inch) 
138-0394  203.25 ± 0.05 mm (8.002 ± 0.002 inch)  205.69 ± 0.13 mm (8.098 ± 0.005 inch)  310.54 ± 0.05 mm (12.226 ± 0.002 inch)  308.51 ± 0.13 mm (12.146 ± 0.005 inch) 
138-2319  203.20 ± 0.05 mm (8.00 ± 0.002 inch)  270.03 ± 0.05 mm (10.647 ± 0.002 inch)  11.00 ± 0.25 mm (.433 ± 0.010 inch)  268.40 ± 0.13 mm (10.557 ± 0.005 inch) 
139-5168  260.34 ± 0.05 mm (10.252 ± 0.002 inch)  258.31 ± 0.13 mm (10.170 ± 0.005 inch) 
140-7019  349.30 ± 0.05 mm (13.752 ± 0.002 inch)  348.64 ± 0.05 mm (13.726± 0.002 inch)  19.5 ± 0.13 mm (.768 ± 0.005 inch)  346.61 ± 0.13 mm (13.646 ± 0.005 inch)  258.25 ± 0.05 mm (10.167 ± 0.002 inch) 
140-7040  448.25 ± 0.05 mm (17.648 ± 0.002 inch)  450.69 ± 0.13 mm (17.744 ± 0.005 inch)  551.34 ± 0.05 mm (21.706 ± 0.002 inch)  549.31 ± 0.13 mm (21.626 ± 0.005 inch)  454.0 ± 0.50 mm (17.874 ± 0.020 inch) 
140-7079  455.00 ± 0.05 mm (17.913 ± 0.002 inch)  454.34 ± 0.05 mm (17.887 ± 0.002 inch)  19.50 ± 0.25 mm (.768 ± 0.010 inch)  452.31 ± 0.13 mm (17.807 ± 0.005 inch)  350.00 ± 0.05 mm (13.780 ± 0.002 inch) 
140-7096  540.25 ± 0.05 mm (21.270 ± 0.002 inch)  542.69 ± 0.13 mm (21.366 ± 0.005 inch)  639.84 ± 0.05 mm (25.191 ± 0.002 inch)  637.81 ± 0.13 mm (25.111 ± 0.005 inch) 
140-7109  571.25 ± 0.05 mm (22.490 ± 0.002 inch)  573.69 ± 0.13 mm (22.586 ± 0.005 inch)  697.31 ± 0.05 mm (27.453 ± 0.002 inch)  697.31 ± 0.13 mm (27.453 ± 0.005 inch) 
140-9846  118.40 ± 0.05 mm (4.661 ± 0.002 inch)  120.84 ± 0.13 mm (4.757 ± 0.005 inch)  193.02 ± 0.05 mm (7.559 ± 0.002 inch)  190.99 ± 0.13 mm (7.519 ± 0.005 inch) 
150-3293  289.85 ± 0.05 mm (11.411 ± 0.002 inch)  292.29 ± 0.13 mm (11.507 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch) 
150-3294  259.23 ± 0.05 mm (10.206 ± 0.002 inch)  261.67 ± 0.13 mm (10.302 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  337.13 ± 0.13 mm (13.280 ± 0.005 inch)  290.0 ± 0.50 mm (11.407 ± 0.020 inch) 
153-5479  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  21.80 ± 0.13 mm (.8587 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.6 ± 0.50 mm (14.000 ± 0.020 inch) 
153-5480  370.25 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  408.92 ± 0.05 mm (16.099 ± 0.002 inch)  21.74 ± 0.13 mm (.856 ± 0.005 inch)  406.89± 0.13 mm (16.019 ± 0.005 inch)  355.6 ± 0.50 mm (14.000 ± 0.020 inch) 
153-5481  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.094 ± 0.13 mm (14.098 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch) 
153-5482  165.35 ± 0.05 mm (6.510 ± 0.002 inch)  167.79 ± 0.13 mm (6.606 ± 0.005 inch)  269.211 ± 0.05 mm (10.599 ± 0.002 inch)  18.26 ± 0.13 mm (.719 ± 0.005 inch)  267.18 ± 0.13 mm (10.519 ± 0.005 inch)  225.25 ± 0.25 mm (17.244 ± 0.020 inch) 
156-2825  462.25 ± 0.05 mm (18.199 ± 0.002 inch)  464.69 ± 0.13 mm (18.295 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  21.50 ± 0.13 mm (.846 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
156-2828  441.52 ± 0.05 mm (17.383 ± 0.002 inch)  443.96 ± 0.13 mm (17.479 ± 0.005 inch)  520.04 ± 0.05 mm (20.474 ± 0.002 inch)  21.50 ± 0.13 mm (.846 ± 0.005 inch)  518.00 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.50 mm (17.244 ± 0.020 inch) 
164-3302  335.25 ± 0.05 mm (13.199 ± 0.002 inch)  337.69 ± 0.13 mm (13.295 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
164-3303  370.255 ± 0.05 mm (14.577 ± 0.002 inch)  372.69 ± 0.13 mm (14.673 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch)  355.60 ± 0.50 mm (14.000 ± 0.020 inch) 
175-2620  473.15 ± 0.05 mm (18.628 ± 0.002 inch)  475.59 ± 0.13 mm (18.724 ± 0.005 inch)  520.04 ± 0.13 mm (20.474 ± 0.005 inch)  20.0 ± 0.13 mm (0.787 ± 0.005 inch)  518.0 ± 0.13 mm (20.394 ± 0.005 inch)  438.0 ± 0.5 mm (17.244 ± 0.02 inch) 
175-2621  10  418.35 ± 0.05 mm (16.470 ± 0.002 inch)  438.0 ± 0.5 mm (17.244 ± 0.02 inch) 
221-1444  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.094 ± 0.13 mm (14.098 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch) 
224-9620  118.4 ± 0.05 mm (4.661 ± 0.002 inch)  120.84 ± 0.13 mm (4.757 ± 0.005 inch)  193.02 ± 0.05 mm (7.599 ± 0.002 inch)  189.99 ± 0.13 mm (7.480 ± 0.005 inch) 
238-5090  370.25 ± 0.05 mm (14.57674 ± 0.00197 inch)  372.69 ± 0.13 mm (14.67281 ± 0.0051 inch)  418.44 ± 0.05 mm (16.47398 ± 0.0020 inch)  411.33 ± 0.08 mm (16.19406 ± 0.0031 inch) 
321-5716  290.25 ± 0.05 mm (11.427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch) 
321-5718  290.25 ± 0.05 mm (11.427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  19.45 ± 0.13 mm (0.766 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.18 ± 0.010 inch) 
321-5719  290.25 ± 0.05 mm (11.427 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  19.45 ± 0.13 mm (0.766 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.18 ± 0.010 inch) 
321-5720  142.39 ± 0.13 mm (5.606 ± 0.005 inch)  139.95 ± 0.05 mm (5.510 ± 0.002 inch)  227.31 ± 0.13 mm (8.949 ± 0.005 inch)  21.22 ± 0.25 mm (0.835 ± 0.009 inch) 
321-5721  300.25 ± 0.05 mm (11.821 ± 0.002 inch)  302.69 ± 0.13 mm (11.917 ± 0.005 inch)  339.34 ± 0.05 mm (13.360 ± 0.002 inch)  19.45 ± 0.13 mm (0.766 ± 0.005 inch)  337.31 ± 0.13 mm (13.280 ± 0.005 inch)  284.0 ± 0.25 mm (11.18 ± 0.010 inch) 
366-8298  238.36 ± 0.07 mm (9.384 ± 0.003 inch)  240.59 ± 0.13 mm (9.472 ± 0.005 inch)  279.28 ± 0.06 mm (10.995 ± 0.002 inch)  277.31 ± 0.13 mm (10.918 ± 0.005 inch) 
374-4847  355.65 ± 0.05 mm (14.002 ± 0.002 inch)  358.094 ± 0.13 mm (14.098 ± 0.005 inch)  418.44 ± 0.05 mm (16.474 ± 0.002 inch)  19.05 ± 0.13 mm (.750 ± 0.005 inch)  416.41 ± 0.13 mm (16.394 ± 0.005 inch) 
375-8049  355.6 ± 0.5 mm (13.9999 ± 0.0197 inch)  335.25 ± 0.05 mm (13.1988 ± 0.0020 inch)  416.41 ± 0.13 mm (16.3941 ± 0.0052 inch)  19.05 ± 0.13 mm (0.7500 ± 0.0052 inch) 
376-6663  290.0 ± 0.05 mm (11.417 ± 0.002 inch)  292.69 ± 0.13 mm (11.523 ± 0.005 inch)  339.28 ± 0.05 mm (13.357 ± 0.002 inch)  336.31 ± 0.13 mm (13.241 ± 0.005 inch) 
458-3635  238.15 ± 0.05 mm (9.376 ± 0.002 inch)  240.59 ± 0.13 mm (9.472 ± 0.005 inch)  279.34 ± 0.05 mm (10.998 ± 0.002 inch)  277.31 ± 0.13 mm (10.918 ± 0.005 inch) 

Caterpillar Information System:

Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169} Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
2012/03/19 An Improved Crankshaft Seal Group is Used on Certain C9 and C9.3 Commercial Engines {1160, 1161}
3512C HD Locomotive Engine Maintenance Interval Schedule
3512C HD Locomotive Engine Fumes Disposal Filter Element - Replace - Closed Crankcase Ventilation (CCV)
C175-16 Marine Propulsion Engines Auxiliary Water Pump - Sea Water
C175-16 Marine Propulsion Engines Water Lines
SPF343 and SPF343C Trailer Mounted Pumpers Speed Sensor - Clean/Inspect
SPF343 and SPF343C Trailer Mounted Pumpers Fuel Filter Differential Pressure - Check
The Operator Monitor Group Malfunctions on D Series Excavators and Mobile Hydraulic Power Units{7490} The Operator Monitor Group Malfunctions on D Series Excavators and Mobile Hydraulic Power Units{7490}
2012/04/24 Improved Coolant Filler Neck Is Used on Certain C32 Marine Engines {1379}
C175-16 Marine Propulsion Engines Water Lines
C175-16 Marine Propulsion Engines Coolant Level Sensor
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101} Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
SPF343 and SPF343C Trailer Mounted Pumpers Configuration Parameters
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101} Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Transmission Manifold - Seal Ring Bore {0679, 3030, 3160} Thermal Spray Procedures for Transmission Manifold - Seal Ring Bore {0679, 3030, 3160}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131} Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134} Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130} Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
3512C and 3516C Marine Auxiliary Engines Coolant Level - Test
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127} Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.