A New Pipe Nipple Is Used in the Fuel Lines for G3606 and G3608 Engines {5479}
- Engine:
- G3606 (S/N: 3XF1-UP; 4ZS1-UP)
- G3608 (S/N: 4WF1-UP; BEN1-UP)
Description of Change: The new pipe nipple is more rugged than the previously used pipe fitting.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g02614237 |
005-8615 Pipe Nipple | |
The new 005-8615 Pipe Nipple replaces the previously used 170-1186 Pipe Fitting .
The new 005-8615 Pipe Nipple is adaptable to the engines listed above back to first production.
The new 005-8615 Pipe Nipple is effective with the following serial numbers:
- 4ZS01536
- BEN00695
Caterpillar Information System:
2012/01/12 A New High Pressure Fuel Pump and Adapter Are Used on C175-16 Petroleum Engines {1251, 1251, 1290}
C13 Engine for Combat and Tactical Vehicles Piston and Rings
C13 Engine for Combat and Tactical Vehicles Piston and Rings
C13 Engine for Combat and Tactical Vehicles Piston and Rings
2011/12/21 New Improved Power Train Control Processor Software Is Now Used on Certain Marine Engines {7610, 7620}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000} Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225} Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225}
C9.3 Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
3516C Generator Set Engines High Altitude Derate Occurrence
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
G3500H 60Hz Generator Sets Engine Oil Temperature Regulator - Replace
3516C Generator Set Engines Coolant Level Is Low
C1.5 and C2.2 Industrial Engines Crankcase Breather (Canister) - Replace
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Fuel System - Inspect
Air and Gas Starting for G3300B Engines{1451} Air and Gas Starting for G3300B Engines{1451}
2012/02/01 A New Air Hose and a New Solenoid Valve Manifold Are Used for the Air Shutoffs on Certain 3512C and 3516C Petroleum Engines {1078, 1078}
2011/12/21 Fuel Injection Pump on C3.3 and C4.4 (Mech) Generator Sets {1251}
3516C and C175-16 Engines Selective Catalytic Reduction Dosing Control System Operation
3516C and C175-16 Engines Selective Catalytic Reduction Warning Operation
3516C and C175-16 Engines Selective Catalytic Reduction Event Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Head Valves
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
2012/01/06 Air Compressor on 3054, 3054B, 3054C, 3054E, 3056, 3056E, C3.3, C3.4, C4.4, C4.4 (Mech), C6.6 and C7.1 Engines {1803}