2011/12/01 Caterpillar


An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}

Usage:

769C 01X


Caterpillar Products:
  • All
  • An improved 5P-8500 Key is now available. The design of the new key incorporates the following improvements:




    Illustration 1g02783256

    Old style Cat key.




    Illustration 2g02783257

    New style Cat key.

    • (1) The key ring was moved to the bottom of the key. This design change will improve the orientation of the key into the lock assembly.

    • (2) The over mold shape was changed to improve the fit of the key in the hand. This change will also improve the orientation of the key into the lock assembly.

    • (3) A new brass material is now being utilized which has a low iron content. The material change will improve the strength in the cross section of the key.

    • (4) Over mold material around the key ring was removed to improve the fit on a key ring.

    Caterpillar Information System:

    Diesel Particulate Filter Regeneration on C7.1 Engines{108F} Diesel Particulate Filter Regeneration on C7.1 Engines{108F}
    New Engine Software Is Available for Tier 4 Interim C9.3 Through C18 Industrial and Machine Engines{1901, 1902, 1920} New Engine Software Is Available for Tier 4 Interim C9.3 Through C18 Industrial and Machine Engines{1901, 1902, 1920}
    Revised Start-Up Procedure For Uninterruptible Power Supply UPSB 125/130 {4480} Revised Start-Up Procedure For Uninterruptible Power Supply UPSB 125/130 {4480}
    2012/01/12 A New Hose Is Used in the Fuel Filter Lines on C175-16 Generator Set Engines {1261, 1274}
    2011/12/19 New Fuel Injectors and New Software Are Used for C175-16 Generator Set Engines {1251, 1254, 1290, 1713, 1901, 1920}
    C7 and C9 On-highway Engines Fluid Recommendations
    C7 and C9 On-highway Engines Refill Capacities
    C13 and C15 On-Highway Engines Reference Information
    C7 and C9 On-highway Engines Plate Locations and Film Locations
    2011/12/15 Procedure to Remedy Loose V-belts on Certain C12 Marine Engines {1207, 1358, 1359, 1397}
    C7 and C9 On-highway Engines Product Description
    C7 and C9 On-highway Engines Maintenance Interval Schedule - C7 On-highway Engines with Shallow Sumps
    C13 Engine for Combat and Tactical Vehicles Exhaust Manifold
    9U-5000 Series Hydraulic Test Bench {0599, 0738} 9U-5000 Series Hydraulic Test Bench {0599, 0738}
    C7 and C9 On-highway Engines Maintenance Interval Schedule - C7 Engines with Deep Sumps that are Used in School Bus Applications
    C7 and C9 On-highway Engines Maintenance Interval Schedule - C7 Engines with Shallow Sumps that are Used in School Bus Applications
    4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
    C7 and C9 On-highway Engines Air Compressor - Check
    C7 and C9 On-highway Engines Compression Brake - Inspect/Adjust/Replace - Cat Compression Brake
    CX48-P2300 Petroleum Transmission Transmission Relief Valve (Transmission Hydraulic Control)
    CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
    CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
    CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
    2012/01/06 New Location for the Air Inlet Temperature Sensor on C175-16 Generator Set Engines {1439, 7400}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.