Circuit Breakers - Reset
Show/hide table
NOTICE |
---|
Replace circuit breakers with the same type and size only. Otherwise, electrical damage can result. If it is necessary to reset circuit breakers frequently, an electrical problem may exist. Contact your Caterpillar dealer. |
Show/hide table
Circuit Breakers - Push in the button to reset the circuit breaker. If the electrical system is working properly, the button will remain depressed. If the button does not remain depressed, check the appropriate electrical circuit. Repair the electrical circuit, if necessary. |
Show/hide table
Illustration 1 | g02749696 |
The circuit breaker panel is located at the rear of the operator station.
Show/hide table
Illustration 2 | g02749697 |
Show/hide table
(1) Caterpillar Monitoring System - 15 Amp |
Show/hide table
(1) Instrument Illumination |
Show/hide table
(1) Monitor, Telemetry Port, Electronic Access Module (EAM) |
Show/hide table
(2) Remote Control System (If Equipped) - 15 Amp |
Show/hide table
(3) Spare (24v) - 15 Amp |
Show/hide table
(4) Payload Control System (If Equipped) - 15 Amp |
Show/hide table
(5) Remote Control System (If Equipped) - 15 Amp |
Show/hide table
(5) Service Port |
Show/hide table
(6) Air Conditioner (If Equipped) - 15 Amp |
Show/hide table
(7) Automatic Lubrication System (If Equipped) - 15 Amp |
Show/hide table
(7) Exhaust Gas Pressure (If Equipped) |
Show/hide table
(7) Horn |
Show/hide table
(8) 24V to 12V Converter - 15 Amp |
Show/hide table
(8) Instrument Illumination |
Show/hide table
(8) Radio (Accessories) (If Equipped) |
Show/hide table
(9) Power Train Electronic Control Module (ECM) - 15 Amp |
Show/hide table
(10) Front Window Washer and Wiper - 15 Amp |
Show/hide table
(10) Side Window Washer and Wiper |
Show/hide table
(10) Rear Window Washer and Wiper |
Show/hide table
(11) Key switch - 15 Amp |
Show/hide table
(11) Service Port |
Show/hide table
(11) Remote Control System (If Equipped) |
Show/hide table
(11) Engine Electronic Control Module (ECM) |
Show/hide table
(11) Monitor, Telemetry Port, Electronic Access Module (EAM) |
Show/hide table
(12) 24V to 12V Converter - 15 Amp |
Show/hide table
(12) Dome Lamp (If Equipped) |
Show/hide table
(12) Power Train Electronic Control Module (ECM) |
Show/hide table
(13) Right Front Lights - 30 Amp (Automatic) |
Show/hide table
(13) Right Rear Lights |
Show/hide table
(14) Left Front Lights - 30 Amp (Automatic) |
Show/hide table
(14) Left Rear Lights |
Show/hide table
Illustration 3 | g01139598 |
(15) 105 Amp - Alternator.
(16) 80 Amp - Main.
Caterpillar Information System:
R3000H Load Haul Dump Central Lubrication System - Lubricate - If Equipped
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System Features
Machine Preheater for Track Feller Bunchers Machine Preparation for Troubleshooting
521B and 522B Track Feller Bunchers Alternate Exit
773G and 775G OFF-Highway Trucks Engine Supplement Hood - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System General Information
521B and 522B Track Feller Bunchers Daily Inspection
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear) - Remove and Install
2011/11/02 Coolant Additive is Now used on Certain Motor Graders {1352, 1395}
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Piston Pump (Work Tool) - High Flow
521B and 522B Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
793F CMD Off-Highway Truck/Tractor Braking System MID 116 - CID 0168 - FMI 04
R3000H Load Haul Dump Collet Pin Bolt Torque - Check
R3000H Load Haul Dump Cooling System Coolant Extender (ELC) - Add
R3000H Load Haul Dump Cooling System Coolant Level - Check
R3000H Load Haul Dump Cooling System Coolant (ELC) - Change
R3000H Load Haul Dump Cooling System Coolant Sample (Level 1) - Obtain
R3000H Load Haul Dump Cooling System Coolant Sample (Level 2) - Obtain
R3000H Load Haul Dump Cooling System Pressure Cap - Clean/Replace
R3000H Load Haul Dump Cooling System Water Temperature Regulator - Replace
R3000H Load Haul Dump Crankshaft Vibration Damper - Inspect
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Solenoid Valve (Ripper)
® for Dozing, Semi-Autonomous Tractor System (SATS) Camera - Clean
521B and 522B Track Feller Bunchers Lifting and Tying Down the Machine