Flywheel
Show/hide table
Illustration 1 | g02697896 |
Rear view of engine |
Show/hide table
Specification for 351-1939 Flywheel Fastener | |||
Item | Qty | Part | Specification Description |
1 | 12 | 0S-1602 Bolt | Before assembly, lubricate the threads with clean engine oil, or graphite base lubricant. |
Torque to |
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Stub Shaft (Rear)
G3516 Engines Engine Speed Sensor
G3516 Engines Engine Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C15 Engines for Combat and Tactical Vehicles Air Inlet and Exhaust System
CG137-08 and CG137-12 Engines Flywheel Housing - Remove and Install
C4.4 Marine Generator Set Engine Operation
CG137-08 and CG137-12 Engines Flywheel - Remove and Install
CG137-08 and CG137-12 Engines Vibration Damper and Pulley - Remove and Install
CG137-08 and CG137-12 Generator Sets Valve Cover
C280 Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)
C280 Marine Engines Nitrogen Oxide Sensor (Engine Exhaust Out)
C9.3 Tier 4 Final Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (Exhaust Differential)
3516C Generator Set Engines Catalytic Converter Sensor
C13, C15, and C18 Tier 4 Final Engines Front Housing and Covers
3516C Generator Sets Glossary
3516C Generator Sets Engine Crankcase Breather - Clean
C15 Engines for Combat and Tactical Vehicles Lubrication System
C4.4 Marine Generator Set Before Starting Engine
CG137-08 and CG137-12 Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
CG137-08 and CG137-12 Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
CG137-08 and CG137-12 Engines Timing Gear Cover - Remove and Install
CG137-08 and CG137-12 Engines Timing Gears - Remove and Install