Track
Show/hide table
Illustration 1 | g03354619 |
(1) Standard pin
(2) Master pin |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
- | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
- | - | - | Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 2. Tighten the bolts to an extra 120 ± 5 degrees. |
- | - | - | The maximum assembly force for the link assembly is |
- | - | - | The assembly force for the master pin is |
A | - | - | Protrusion for the master bushing is |
B | - | - | Distance between the bolt holes is |
C | - | - | Distance between the bolt holes is |
D | - | - | Protrusion for each end of the standard bushing |
E | - | - | Protrusion at one end of the standard pin |
F | - | - | Protrusion at one end of the standard master pin |
Caterpillar Information System:
C3.4B Industrial Engine Starting the Engine
2011/07/14 A New Oil Suction Screen Is Used in C175-16 Generator Set Engines {1302}
CG137-08 and CG137-12 Industrial Engines Aftercooler - Test
CG137-08 and CG137-12 Engines Spark Plug Adapter - Remove and Install
CG137-08 and CG137-12 Industrial Engines Aftercooler
CG137-08 and CG137-12 Engines Spark Plugs - Remove and Install
CG137-08 and CG137-12 Engines Transformer - Remove and Install
CG137-08 and CG137-12 Engines Carburetor - Remove and Install
CG137-08 and CG137-12 Engines Rotary Actuator (Gas Pressure Regulator) - Remove and Install
CG137-08 and CG137-12 Engines Rotary Actuator (Carburetor) - Remove and Install - G3412B
3500C Marine Engines Vibration Damper Guard
3512B and 3512C Petroleum Generator Set Engines Flywheel Housing Cover
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
C3.4B Industrial Engine Emissions Certification Film
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
CG137-08 and CG137-12 Engines Exhaust Bypass - Remove and Install
2011/07/22 Proper Installation of Exhaust Bellows for C175-16 Generator Set Engines {1059}
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
C15 and C18 Engines for Caterpillar Built Machines Engine Trunnion
C13, C15, and C18 Tier 4 Final Engines Flywheel
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
C3.4B Engines for Caterpillar Built Machines Compression - Test