H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Caterpillar


Pressure Control Valve - Install

Usage:

H110E S HHB

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite C5A Copper Antiseize 

Note: Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.

Note: Lubricate the O-ring seals with clean hydraulic oil.



    Illustration 1g02646755

  1. Install pressure control valve (2) into control valve (3).

  2. Apply Tooling (A) to the threads of bolts (1). Install bolts (1).

Caterpillar Information System:

H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Wear Plates - Remove and Install
330D and 336D Excavators Machine System Specifications Hydraulic Generator
320E RR Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712} Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712}
320E RR Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pads - Remove and Install
329E MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
330D and 336D Excavators Machine System Specifications Hydraulic Generator
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Guard
325D and 329D Excavators Machine System Specifications Travel Counterbalance Valve
330C Forest Machine Machine System Specifications Track
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.