330D and 336D Excavators Machine System Specifications Caterpillar


Hydraulic Generator

Usage:

330D MH C5K



Illustration 1g02646276

Top view

Table 1
Specification for 273-6546 Hydraulic Generator Gp    
Item     Qty     Part     Specification Description    
1     2     7X-0346 Bolt     Torque to
150 ± 25 N·m (111 ± 18 lb ft).    



Illustration 2g02646277

Table 2
Specification for 273-6546 Hydraulic Generator Gp    
Item     Qty     Part     Specification Description    
2     2     -     Torque the setscrews to
22 ± 2 N·m (195 ± 18 lb in).    
3     1     -     Torque the clamp bolt to
34 ± 3 N·m (301 ± 27 lb in).    
4     4     8T-4910 Bolt     Torque to
22 ± 2 N·m (195 ± 18 lb in).    

Caterpillar Information System:

320E RR Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712} Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712}
320E RR Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pads - Remove and Install
329E MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
G3512 Gas Engine Flywheel
330D and 336D Excavators Machine System Specifications Stick Cylinder
330D and 336D Excavators Machine System Specifications Return and Oil Filter Lines
301.4C Mini Hydraulic Excavator Travel Motor
301.4C Mini Hydraulic Excavator Hydraulic System Breather - Replace
301.4C Mini Hydraulic Excavator Fuel Injection Nozzles - Check/Adjust
301.4C Mini Hydraulic Excavator Hydraulic System Oil Filter (Pilot) - Check/Replace
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Wear Plates - Remove and Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Install
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Install
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.