330D and 336D Excavators Machine System Specifications Caterpillar


Return and Oil Filter Lines

Usage:

336D L J2F



Illustration 1g01426571

Top view

Table 1
Specification for 248-9838 Return Lines Gp    
Item     Qty     Part     Specification Description    
1     1     275-1675 Hose As     Torque to
190 ± 20 N·m (140 ± 15 lb ft).    



Illustration 2g02645096

View A-A

Table 2
Specification for 248-9838 Return Lines Gp    
Item     Qty     Part     Specification Description    
2     12     101-7402 Bolt     Torque to
50 ± 10 N·m (37 ± 7 lb ft).    
3     2     096-4883 Locknut     Torque to
22 ± 3 N·m (195 ± 27 lb in).    

Caterpillar Information System:

301.4C Mini Hydraulic Excavator Travel Motor
301.4C Mini Hydraulic Excavator Hydraulic System Breather - Replace
301.4C Mini Hydraulic Excavator Fuel Injection Nozzles - Check/Adjust
301.4C Mini Hydraulic Excavator Hydraulic System Oil Filter (Pilot) - Check/Replace
301.4C Mini Hydraulic Excavator Swing Gear Grease - Check
345B Series II Excavator Machine System Specifications Bucket Cylinder
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Rotator Cycle Time - Check
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Cylinder Cycle Time - Check
320E and 323E Excavators Machine Systems Oil Filter (Hydraulic, Return)
301.4C Mini Hydraulic Excavator Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Remove
330D and 336D Excavators Machine System Specifications Stick Cylinder
G3512 Gas Engine Flywheel
329E MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pads - Remove and Install
320E RR Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712} Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712}
320E RR Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
330D and 336D Excavators Machine System Specifications Hydraulic Generator
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Wear Plates - Remove and Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Install
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.