3500B Engines for Caterpillar Built Power Modules Caterpillar


Connecting Rod and Main Bearing Journals

Usage:

3516 29Z

Connecting Rod Bearing Journals

Table 1
Specification for 161-6928 Crankshaft Gp, 4P-2612 Crankshaft, and 8N-0337 Crankshaft Gp 
Item  Qty  Part  Specification Description 
Refer to Guidelines For Reusable Parts, SEBF8009, "Main Bearings And Connecting Rod Bearings" for more information. 
Diameter of crankshaft journal (Bearing Surface) for connecting rod bearings: 
Original size journal is 135.000 ± 0.025 mm (5.3149 ± 0.0010 inch).
Clearance between bearing and new journal is 0.107 to 0.218 mm (0.0042 to 0.0086 inch)

Main Bearing Journals

Table 2
Specification for 161-6928 Crankshaft Gp, 4P-2612 Crankshaft, and 8N-0337 Crankshaft Gp 
Item  Qty  Part  Specification Description 
Refer to Guidelines For Reusable Parts, SEBF8009, "Main Bearings And Connecting Rod Bearings" for more information. 
Diameter of crankshaft journal (Bearing Surface) for main bearings: 
Original size journal is 160.000 ± 0.025 mm (6.2992 ± 0.0010 inch).
Clearance between bearing and new journal is 0.122 to 0.241 mm (0.0048 to 0.0095 inch)

Caterpillar Information System:

C15 Generator Sets Circuit Breakers - Reset
C15 Generator Sets Voltage Regulators
C15 Generator Sets Refill Capacities and Recommendations
CD44B and CD54B Vibratory Asphalt Compactors Fuel Tank Strainer - Clean
3512E Land Electric Drive Monitoring System
C175-16 Marine Propulsion Engines Pressure Sensor
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Before Starting Engine
C175-16 Locomotive Engine Engine Oil Lines
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
C175-16 Petroleum Engines Flexible Coupling
C175-16 Marine Propulsion Engines Fuel Lines
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C3.4B Engines For Caterpillar Built Machines Starter Motor
C9.3 Engines for Caterpillar Built Machines Engine Oil Level Sensor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Inlet Pressure Sensor
349F and 352F Excavators Machine System Specifications Main Hydraulic Pump Mounting
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Outlet Pressure Sensor
The 170-1186 Pipe Fitting in the Fuel Lines on G3606 and G3608 Engines May Leak{1259, 1274, 1704} The 170-1186 Pipe Fitting in the Fuel Lines on G3606 and G3608 Engines May Leak{1259, 1274, 1704}
C15 Petroleum Generator Set Engines Flywheel Housing
C9 Generator Set Refill Capacities
3516C Generator Sets Model View Illustrations
Proactive Updates of the Auxiliary Cooling System Piping are not Recommended on Certain Commercial Engines{1355, 1380, 1393} Proactive Updates of the Auxiliary Cooling System Piping are not Recommended on Certain Commercial Engines{1355, 1380, 1393}
3516C Generator Sets Safety Messages
C15 Generator Sets Sensors and Electrical Components
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.