Combined Function - Electric Control: Default Value of Work Tool Parameters
Note: For this system, parameters that are not shown in the tables, do not affect operation of the work tool.
Note: The parameters in the "DARK GRAY" cells do not affect the operation of the work tool.
Table 1 shows a quick reference to the approved Caterpillar work tools that are used.
Table 2 shows parameters for "TOOL#1" through "TOOL#5".
Table 3 shows parameters for "TOOL#6" through "TOOL#10".
Show/hide table
320E / 320E RR / 320F / 323E / 323F Combined Function - Electric Control | ||||
Work Tool | Tool Name | Flow Control | Pump Control | TOOL#s |
Hammer | H115S | One-Way | One Pump | #1 |
Hammer | H120CS | One-Way | Two Pumps | #2 |
Hammer | H130S | One-Way | Two Pumps | #3 |
Shear | MP15/P315 | Two-Way | One Pump | #4 |
Shear | S320B | Two-Way | One Pump | #5 |
Shear | S340B | Two-Way | Two Pumps | #6 |
Grapple | G315B | Two-Way | One Pump | #7 |
Tilt Bucket | NGT | Two-Way | One Pump | #8 |
Compactor | CVP110 | One-Way | One Pump | #9 |
Bucket Thumb | THUMB 1P | Two-Way | One Pump | #10 |
Refer to Testing and Adjusting, "Work Tool Parameter - Program" for the Tool Control System to find details of each of the parameters listed.
Show/hide table
Parameter Description | #1 | #2 | #3 | #4 | #5 |
General Parameters | |||||
Tool Program Tool Type | HAMMER | HAMMER | HAMMER | SHEAR | SHEAR |
Tool Program Name | H115S | H120CS | H130S | MP15/P315 | S320B |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Pump #2 | Combined Flow | Combined Flow | Pump #2 | Pump #2 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #1 Parameters | |||||
Tool Program Attachment Valve #1 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #1 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #1 One Way/ Two Way Valve Mode | One-Way | One-Way | One-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #1 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #1 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Tool Program Attachment Valve #1 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #2 Parameters | |||||
Tool Program Attachment Valve #2 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #2 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #2 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #2 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #2 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Tool Program Attachment Valve #2 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #3 Parameters | |||||
Tool Program Attachment Valve #3 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #3 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #3 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #3 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #3 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Tool Program Attachment Valve #3 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Show/hide table
Parameter Description | #6 | #7 | #8 | #9 | #10 |
General Parameters | |||||
Tool Program Tool Type | SHEAR | GRAPPLE | TILT BUCKET | COMPACTOR | BUCKET THUMB |
Tool Program Name | S340B | G315B | NGT | CVP110 | THUMB 1P |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Combined Flow | Pump #2 | Pump #2 | Pump #2 | Pump #2 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #1 Parameters | |||||
Tool Program Attachment Valve #1 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #1 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #1 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | One-Way | Two-Way |
Tool Program Attachment Valve #1 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #1 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Tool Program Attachment Valve #1 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #2 Parameters | |||||
Tool Program Attachment Valve #2 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #2 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #2 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #2 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #2 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Tool Program Attachment Valve #2 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #3 Parameters | |||||
Tool Program Attachment Valve #3 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #3 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #3 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #3 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #3 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Tool Program Attachment Valve #3 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Caterpillar Information System:
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Combined Function - Electric Control: Relief Valve (Line) - Test and Adjust
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Flow Limit Valves
3500B Engines for Caterpillar Built Power Modules Water Pump
C15 Petroleum Generator Set Engines Fuel Pressure Sensor
349F and 352F Excavators Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
C4.4 Industrial Engine Crankshaft Gear (Balancer Drive) - Remove and Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
XQ400 Power Module Gas Pressure Regulator Condensation - Drain
C175-16 Petroleum Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C175-16 Marine Propulsion Engines Fuel Lines
C175-16 Petroleum Engines Flexible Coupling
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
C175-16 Locomotive Engine Engine Oil Lines
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Before Starting Engine
C175-16 Marine Propulsion Engines Pressure Sensor
3512E Land Electric Drive Monitoring System
CD44B and CD54B Vibratory Asphalt Compactors Fuel Tank Strainer - Clean
C15 Generator Sets Refill Capacities and Recommendations
C15 Generator Sets Voltage Regulators