C13, C15, and C18 Tier 4 Final Engines Caterpillar


Valve Mechanism Cover

Usage:

826K 232


图 1g02610317


图 2g02610257
气门室盖的拧紧顺序


图 3g02610277
气门室盖底座的拧紧顺序

表 1
246-5628 气门机构盖总成的技术规格 
项目  数量  零件  技术规格说明 
243-1159 紧固件  按照图 2 中所示的数字顺序拧紧至扭矩为 18 ± 3 N·m (159 ± 27 lb in)。 
272-2583 O 形密封圈  用清洁的发动机机油润滑接合面和密封件。 
14  9L-8925 螺栓  按照图 3 中所示的数字顺序拧紧螺栓。 
122-1472 螺栓 
将蓝色 Loctite 242 涂覆到将电子单体喷油器的导线紧固到气门室盖底座上的螺栓的螺纹上。 

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
XQ400 Power Module Gas Pressure Regulator Condensation - Drain
CG137-08 and CG137-12 Engines Coolant Level - Check
C15 Generator Sets Model View Illustrations
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
992K Wheel Loader Fuel Tank Strainer - Clean
2011/06/24 An Additional One-Piece Steel Piston Is Available for Cylinder Packs That Are Utilized in Certain C15 On-Highway Truck Engines {1214, 1225}
C15 and C18 Tier 4 Final Engines Swirl Plate (ARD Combustion) - Inspect/Clean
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Camshaft Bearings
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Pan
C4.4 Industrial Engine Crankshaft Gear (Balancer Drive) - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
C15 Petroleum Generator Set Engines Fuel Pressure Sensor
3500B Engines for Caterpillar Built Power Modules Water Pump
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Flow Limit Valves
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Combined Function - Electric Control: Relief Valve (Line) - Test and Adjust
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Combined Function - Electric Control: Default Value of Work Tool Parameters
C175-16 Petroleum Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
C175-16 Marine Propulsion Engines Fuel Lines
C175-16 Petroleum Engines Flexible Coupling
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.