C13, C15, and C18 Tier 4 Final Engines Caterpillar


Engine Oil Filter Base

Usage:

826K 232


图 1g02610260

表 1
200-0655 机油滤清器底座总成技术规格 
项目  数量  零件  技术规格说明 
4N-8150 弹簧  在试验力下的长度为 55.24 mm (2.175 in)。 
试验力为 75.619 ± 5.800 N17 (.000 ± 1.304 lb)
试验后的自由长度为 93.726 mm (3.6900 in)
2P-4304 空心螺柱  在空心螺柱锥形端的螺纹上涂抹长度为 10.5 ± 1.5 mm (0.41 ± 0.06 in) 的红色 Loctite 271。 
拧紧至扭矩为 68 ± 7 N·m (50 ± 5 lb ft)
319-6234 螺塞组件  拧紧至扭矩为 100 ± 15 N·m (74 ± 11 lb ft)。 

Caterpillar Information System:

3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
XQ400 Power Module Gas Pressure Regulator Condensation - Drain
CG137-08 and CG137-12 Engines Coolant Level - Check
C15 Generator Sets Model View Illustrations
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
992K Wheel Loader Fuel Tank Strainer - Clean
2011/06/24 An Additional One-Piece Steel Piston Is Available for Cylinder Packs That Are Utilized in Certain C15 On-Highway Truck Engines {1214, 1225}
C15 and C18 Tier 4 Final Engines Swirl Plate (ARD Combustion) - Inspect/Clean
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Camshaft Bearings
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Pan
C4.4 Industrial Engine Crankshaft Gear (Balancer Drive) - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
C15 Petroleum Generator Set Engines Fuel Pressure Sensor
3500B Engines for Caterpillar Built Power Modules Water Pump
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Flow Limit Valves
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Combined Function - Electric Control: Relief Valve (Line) - Test and Adjust
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Combined Function - Electric Control: Default Value of Work Tool Parameters
C175-16 Petroleum Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.