C15 Generator Sets Caterpillar


Model View Illustrations

Usage:

C15 GG5
The following engine model views show typical C15 Generator Set features. The operator should become familiar with the locations of these items. Due to individual applications, your engine may appear different from the illustrations.


Illustration 1g02610156
Right Hand Side View
(1) Enclosure for the control panel
(2) Terminal box for the generator
(3) Air cleaner
(4) Engine oil level gauge (dipstick)
(5) Oil filler
(6) Engine oil cooler
(7) Radiator cap
(8) Engine coolant drain
(9) Engine oil drain plug
(10) Engine oil drain
(11) Engine oil filters
(12) Engine oil drain valve


Illustration 2g02609946
Left Hand Side View
(13) Engine lifting eye
(14) Lifting eye for generator
(15) Starting motor
(16) Fuel priming pump
(17) Secondary fuel filter
(18) Fuel filter/water separator

Caterpillar Information System:

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
992K Wheel Loader Fuel Tank Strainer - Clean
2011/06/24 An Additional One-Piece Steel Piston Is Available for Cylinder Packs That Are Utilized in Certain C15 On-Highway Truck Engines {1214, 1225}
C15 and C18 Tier 4 Final Engines Swirl Plate (ARD Combustion) - Inspect/Clean
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Camshaft Bearings
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Medium Pressure Hydraulic System
2011/06/16 A New Flywheel Housing with Additional Holes for the Timing Pin Is Used on C175-16 Generator Set Engines {1157}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
CG137-08 and CG137-12 Engines Coolant Level - Check
XQ400 Power Module Gas Pressure Regulator Condensation - Drain
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Pan
C4.4 Industrial Engine Crankshaft Gear (Balancer Drive) - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
C15 Petroleum Generator Set Engines Fuel Pressure Sensor
3500B Engines for Caterpillar Built Power Modules Water Pump
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Flow Limit Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.