C3.4B Engines For Caterpillar Built Machines Caterpillar


Camshaft Bearings

Usage:

CD-44B 398


Illustration 1g02608336
Typical example

(1) The diameter of the installed camshaft bearing ... 54.083 to 54.147 mm (2.12925 to 2.13177 inch)

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Medium Pressure Hydraulic System
2011/06/16 A New Flywheel Housing with Additional Holes for the Timing Pin Is Used on C175-16 Generator Set Engines {1157}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
2011/10/13 Replacement and Adjustment Procedures for the Fan Drive of Certain Commercial Engines {1359}
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSIEN-CSION-CSPEN Circuit Board - Replace
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz Unit Final Check
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz Manual Transfer - Check
C32 Auxiliary Engine Cold Weather Starting
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz On-Battery - Check
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Tier 4 Final Engines Swirl Plate (ARD Combustion) - Inspect/Clean
2011/06/24 An Additional One-Piece Steel Piston Is Available for Cylinder Packs That Are Utilized in Certain C15 On-Highway Truck Engines {1214, 1225}
992K Wheel Loader Fuel Tank Strainer - Clean
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
C15 Generator Sets Model View Illustrations
CG137-08 and CG137-12 Engines Coolant Level - Check
XQ400 Power Module Gas Pressure Regulator Condensation - Drain
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.