A New Flywheel Housing with Additional Holes for the Timing Pin Is Used on C175-16 Generator Set Engines {1157}
- Generator Set:
- C175-16 (S/N: WYB1-UP)
Description of Change: The new flywheel housing has two additional timing holes for the flywheel. The additions of the holes improve accessibility for pinning the flywheel in order to find the top center position for the no. 1 cylinder.
One hole is located on each side of the flywheel housing, between the covers for the starting motors or between the starting motors.
Adaptable To:
Show/hide table
Illustration 1 | g02607756 |
Timing hole on one side of the new flywheel housing |
Table 1 lists the sequence of the C175-16 flywheel housings.
Show/hide table
Sequence of the C175-16 Flywheel Housings     | |
Part     | Status     |
287-7025 Flywheel Housing Gp     | Canceled and replaced     |
330-4462 Flywheel Housing     | Canceled and replaced     |
342-7286 Flywheel Housing     | Current     |
The new flywheel housing is effective with WYB00190
Caterpillar Information System:
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
2011/10/13 Replacement and Adjustment Procedures for the Fan Drive of Certain Commercial Engines {1359}
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSIEN-CSION-CSPEN Circuit Board - Replace
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz Unit Final Check
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz Manual Transfer - Check
C32 Auxiliary Engine Cold Weather Starting
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz On-Battery - Check
C15 Generator Sets Safety Messages
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz DC Bus Voltage - Test
TA19 Agriculture Transmission Electronic Control System MID 081 - CID 0177 - FMI 03
TA19 Agriculture Transmission Electronic Control System Transmission, SPN 1542 - FMI 4
TA19 Agriculture Transmission Electronic Control System Transmission, SPN 1542 - FMI 3
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Medium Pressure Hydraulic System
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C3.4B Engines For Caterpillar Built Machines Camshaft Bearings
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Tier 4 Final Engines Swirl Plate (ARD Combustion) - Inspect/Clean
2011/06/24 An Additional One-Piece Steel Piston Is Available for Cylinder Packs That Are Utilized in Certain C15 On-Highway Truck Engines {1214, 1225}
992K Wheel Loader Fuel Tank Strainer - Clean
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
C15 Generator Sets Model View Illustrations
CG137-08 and CG137-12 Engines Coolant Level - Check