Machine Drift on a Slope - Check
技术规格
Show/hide table
"机器在斜坡上的沉降 - 检查"     | |||
---|---|---|---|
沉降 mm (in)     | |||
新     | 翻新     | 维修极限     | 实际值     |
0     | 0     | 0     |     |
简介
测量机器在斜坡上的沉降量可以确定是否需要检查行驶制动器。
注: 此项测试所用的机器配置可能会影响该测试结果。 有关此项测试所用的机器配置,请参阅测试和调整, "操作检查"。
注: 执行操作检查之前,必须根据卸压阀压力技术规范设定卸压阀压力。 请参阅测试和调整, "技术规范"。
所需工具
Show/hide table
说明     | 数量     |
---|---|
秒表     | 1     |
标尺 150 mm (6 in)     |
1     |
测试步骤
Show/hide table
图 1 | g00297342 |
- 将机器停放在 12 度斜坡上。 斜坡表面必须坚硬、平滑。
- 如图所示,放置作业机具。 参考图 1。
- 铲斗应空载。
- 为了指示机器相对于斜坡的位置,在履带和履带支重轮架上均作上标记。 参考图 2。
Show/hide table
图 2 | g00297498 |
- 停止发动机。
- 3 分钟后,测量机器在斜坡上的移动量。
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
3500 Engines Exhaust Manifold
C15 Petroleum Generator Set Engines Main Bearing Journal
336E Excavator Machine System Specifications Travel Motor Guard
C15 and C18 Industrial Engines Connecting Rod Bearing Journal
C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor
3500 Engines Exhaust Manifold
3500B Locomotive Engines Exhaust Manifold
C13 Tier 4 Final Engines Engine Support (Front)
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing Cover
UPSB220 Uninterruptible Power Supply Unit Upgrade
UPSB220 Uninterruptible Power Supply DC Capacitor - Replace
C9.3 Tier 4 Final Engines Water Temperature Regulator
3500 Engines Exhaust Fitting
3500 Engines Exhaust Fitting
G3512 Gas Engine Exhaust Fitting
C15 Generator Set Engine Piston and Rings
3500 Engines Air Cleaner
3500 Engines Air Cleaner
3500 Engines Air Cleaner
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
3500 Engines Engine Air Cleaner Service Indicator
3500 Engines Engine Air Cleaner Service Indicator
C15 Petroleum Engines Air Shutoff - Test