C15 Petroleum Generator Set Engines Caterpillar

Main Bearing Journal

Usage:

C15 115

Show/hide table

表 1
221-9360 凸轮轴、 189-4918 凸轮轴和 337-0201 凸轮轴技术规格
项目	数量	零件	技术规格说明
-	-	-	主轴承轴颈的原始尺寸为 120.650 ± 0.020 mm (4.7500 ± 0.0008 in)。
			0.63 mm (0.025 in) 小尺寸主轴承轴颈的直径为 120.015 ± 0.020 mm (4.7250 ± 0.0008 in)。
			1.27 mm (0.050 in) 小尺寸主轴承轴颈的直径为 119.380 ± 0.020 mm (4.7000 ± 0.0008 in)。
			新轴承和有两个螺栓的新主轴承轴颈盖的间隙为 0.076 至 0.186 mm (0.0030 至 0.0073 in)。
			新轴承和有四个螺栓的新主轴承轴颈盖的间隙为 0.071 至 0.178 mm (0.0028 至 0.0070 in)。
			缸体中新轴承孔的原始尺寸为 129.891 ± 0.013 mm (5.1138 ± 0.0005 in)。缸体中 0.63 mm (0.025 in) 大尺寸主轴承孔的直径为 130.521 ± 0.013 mm (5.1387 ± 0.0005 in)。

Caterpillar Information System:

336E Excavator Machine System Specifications Travel Motor Guard

C15 and C18 Industrial Engines Connecting Rod Bearing Journal

C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor

3500 Engines Exhaust Manifold

3500B Locomotive Engines Exhaust Manifold

C13 Tier 4 Final Engines Engine Support (Front)

C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing Cover

UPSB220 Uninterruptible Power Supply Unit Upgrade

UPSB220 Uninterruptible Power Supply DC Capacitor - Replace

UPSB220 Uninterruptible Power Supply AC Filter Capacitor - Replace

UPSB220 Uninterruptible Power Supply AC Capacitor - Replace

Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714} Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714}

3500 Engines Exhaust Manifold

C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner

336F XE Excavator Machine System Machine Drift on a Slope - Check

C9.3 Tier 4 Final Engines Water Temperature Regulator

3500 Engines Exhaust Fitting

3500 Engines Exhaust Fitting

G3512 Gas Engine Exhaust Fitting

C15 Generator Set Engine Piston and Rings

3500 Engines Air Cleaner

3500 Engines Air Cleaner

3500 Engines Air Cleaner

C13, C15, and C18 Tier 4 Final Engines Housing (Front)