C15 and C18 Industrial Engines Caterpillar

Connecting Rod Bearing Journal

Usage:

C18 EJG

Show/hide table

表 1
技术规格，用于 221-9360 曲轴、 189-4918 曲轴和 337-0201 曲轴
项目	数量	零件	技术规格说明
-	-	-	连杆轴颈的原始尺寸为 97.000 ± 0.020 mm (3.8189 ± 0.0008 inch)。
			0.63 mm (0.025 inch) 减小尺寸连杆轴颈的直径为 96.37 mm (3.794 inch)。
			1.27 mm (0.050 inch) 减小尺寸连杆轴颈的直径为 95.73 mm (3.769 inch)。
			新轴承和轴颈之间的间隙为 0.062 mm to 0.160 mm (0.0024 inch to 0.0063 inch)。
			轴承与轴颈之间的最大允许间隙为 0.20 mm (0.008 inch)。

Caterpillar Information System:

C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor

3500 Engines Exhaust Manifold

3500B Locomotive Engines Exhaust Manifold

C13 Tier 4 Final Engines Engine Support (Front)

C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing Cover

UPSB220 Uninterruptible Power Supply Unit Upgrade

UPSB220 Uninterruptible Power Supply DC Capacitor - Replace

UPSB220 Uninterruptible Power Supply AC Filter Capacitor - Replace

UPSB220 Uninterruptible Power Supply AC Capacitor - Replace

Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714} Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714}

C9.3 Tier 4 Final Engines Flywheel

C13, C15, and C18 Tier 4 Final Engines Flywheel

336E Excavator Machine System Specifications Travel Motor Guard

C15 Petroleum Generator Set Engines Main Bearing Journal

3500 Engines Exhaust Manifold

C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner

336F XE Excavator Machine System Machine Drift on a Slope - Check

C9.3 Tier 4 Final Engines Water Temperature Regulator

3500 Engines Exhaust Fitting

3500 Engines Exhaust Fitting

G3512 Gas Engine Exhaust Fitting

C15 Generator Set Engine Piston and Rings

3500 Engines Air Cleaner

3500 Engines Air Cleaner