Cat® Alarm and Protection System Control Panel Caterpillar


Overview (DCU 410)

Usage:

C280-16 A4F



Illustration 1g02459816

Typical example of the DCU 410 control panel

Buttons

The DCU has buttons for the following:

  • "Start Engine"

  • "Stop Engine"

  • "Alarm List"

  • "Menu"

  • Arrow up and down

  • Four soft keys, with varying functionality

Screen Layout

The screen is divided into three main sections:

Status bar - Top most line on the screen, which is reserved for engine state and status symbols.

Soft button line - Bottom most line on the screen, which is reserved for soft buttons, which have varying functionality depending on the selected screen.

Main screen area - The main screen area is where all instruments and menu items are displayed.

Screen Navigation




Illustration 2g02459818

Arrow buttons

The DCU can have multiple screens that show instrumentation. Press the arrow buttons to navigate from one instrument screen to another. If there is only one instrument screen, pressing the buttons will not change the screen. Pressing the same button repeatedly will eventually scroll around to the same screens.

Caterpillar Information System:

Cat® Alarm and Protection System Control Panel System Overview
Cat® Alarm and Protection System Control Panel General Information
C3.4B Industrial Engine Engine Oil Level - Check
UPSB220 Uninterruptible Power Supply Troubleshooting
UPSB220 Uninterruptible Power Supply Component Location
992K Wheel Loader Fuel Tank Cap Filter - Replace
C27 Petroleum Generator Set Engines NOx Reduction System (NRS) - Test
C27 Generator Set Engines ECM - Replace
2011/04/15 Improved Registration Process for Retrofit Products {1000, 7000}
C27 Petroleum Generator Set Engines Exhaust Balance Valve - Test
349F and 352F Excavators Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
Cat® Alarm and Protection System Control Panel Start and Stop Engine (DCU 410)
Cat® Alarm and Protection System Control Panel Alarm List (DCU 410)
C9 Industrial Engines Monitoring System - If Equipped
C175-16 Petroleum Generator Set Engines Crankshaft Vibration Damper - Inspect
Cat® Alarm and Protection System Control Panel Soft Keys (DCU 410)
Cat® Alarm and Protection System Control Panel Menu (DCU 410)
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 177 - FMI 0
C175-16 Petroleum Generator Set Engines Driven Equipment - Check
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 3823 - FMI 0
C175-16 Marine Engines Overhaul (Major)
C175-16 Marine Engines Overhaul (Top End)
C15 and C18 Tier 4 Final Engines Belts - Adjust - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.