C11 and C13 Industrial Engines Caterpillar


Grounding Stud - Inspect/Clean/Tighten

Usage:

C11 GLS

------ VÝSTRAHA! ------

Připojení kabelů k akumulátoru a odpojení kabelů od akumulátoru může způsobit explozi a následně vážný nebo smrtelný úraz. Připojení a odpojení dalších elektrických zařízení k akumulátoru může rovněž způsobit explozi a následně vážný nebo smrtelný úraz. Připojování kabelů nebo jiných elektrických zařízení a jejich odpojení by mělo být prováděno v nevýbušné atmosféře.




Ilustrace 1g00765094
Zemnicí kolík elektronické soustavy (boční pohled)

Zkontrolujte, zda jsou spojení svazku vodičů OEM v dobrém stavu. Prověřte stav svazku vodičů OEM.

Zemnicí kolík elektronické soustavy musí být vybaven vodičem k uzemnění akumulátoru. Při každé výměně oleje zemnicí kolík elektronické soustavy utáhněte. Zemnicí vodiče a pásky musí být v oblasti uzemnění motoru spojeny. Všechny zemnicí prvky musí být dobře utažené a nesmí vykazovat stopy koroze.

  • Vyčistěte zemnicí kolík elektronické soustavy a koncovky zemnicího pásku elektronické soustavy čistým hadříkem.

  • Pokud jsou spojení zkorodovaná, vyčistěte je pomocí roztoku jedlé sody a vody.

  • Udržujte zemnicí kolík elektronické soustavy a pásek čisté a pokryté vrstvičkou maziva MPGM nebo čisté vazelíny.

Caterpillar Information System:

UPSB505 Uninterruptible Power Supply Electrical Specification
CG137-08 and CG137-12 Industrial Engines Cylinder Liner Projection - Inspect
C11 and C13 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
CG137-08 and CG137-12 Industrial Engines Main Bearings - Inspect
C4.4 Industrial Engine Temperature Sensor (DPF Inlet)
C4.4 Industrial Engine Diesel Particulate Filter
2011/01/27 A New Pressure Regulating Valve Is Used for Air Starting on some 3500B Marine Engines {108A, 1462}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317} Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
C11 and C13 Industrial Engines Engine Oil and Filter - Change
C11 and C13 Industrial Engines Refill Capacities
UPSB505 Uninterruptible Power Supply Component Description
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Module - Test
2011/02/09 New Configuration Feature for the Remote Advisor Panel for Some G3500 Petroleum Engines with NO<SUB>x</SUB> Feedback {1901, 1920}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Control Panel
2011/02/11 Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
C13 and C15 Generator Set Engines Fuel System
C280 Marine, Marine Auxiliary, and Petroleum Engines Control Panel - Inspect/Test
UPSB505 Uninterruptible Power Supply Product Location
PM3516 Power Modules Parallel Operation
C13 and C15 Generator Set Engines Air Inlet and Exhaust System
3512C and 3516C Marine Auxiliary and Generator Set Engines Coolant Level - Check
PM3516 Power Modules Battery Charger - Check
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.