Retarder Hydraulic Control Valve - Remove
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolt (1) and bolts (2). Remove guard (3).
Show/hide table
Illustration 2 g02391239 - Disconnect harness assembly (4).
Show/hide table
Illustration 3 g02391241 - Remove bolts (5) in order to remove retarder hydraulic control valve (6).
Show/hide table
Illustration 4 g02391243 - Remove O-ring seal (7).
Show/hide table
Illustration 1 | g02380416 |
Caterpillar Information System:
2011/08/10 New Line Relief Valves are Now Used for Certain Excavators and Mobile Hydraulic Power Units {5069, 5117}
3612 and 3616 Fast Vessel Engines Maintenance Interval Schedule
3516C Locomotive Engines Auxiliary Water Pump - Install
3612 and 3616 Fast Vessel Engines Maintenance Interval Schedule
Filtration Procedure for Kidney Looping Off-Highway Truck Steering Oil {0680, 4300, 4332, 5050, 7542} Filtration Procedure for Kidney Looping Off-Highway Truck Steering Oil {0680, 4300, 4332, 5050, 7542}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056} Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
3516C Locomotive Engines Auxiliary Water Pump - Remove
3516C and C175-16 Engines Selective Catalytic Reduction Diagnostic Trouble Codes
UPSB505 Uninterruptible Power Supply UPS Personalization
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Operator Controls
CG137-08 and CG137-12 Industrial Engines Exhaust Bypass Valve
CG137-08 and CG137-12 Industrial Engines Catalytic Converter Has High Inlet Temperature
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Install
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Disassemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Assemble
Installation of Improved Battery Charger on Certain C27 Generator Sets{1401, 751B} Installation of Improved Battery Charger on Certain C27 Generator Sets{1401, 751B}
CG137-08 and CG137-12 Industrial Engines Fuel Shutoff - Test
C32 Generator Set Starting the Engine
3516C Locomotive Engines Auxiliary Water Pump - Disassemble
CG137-08 and CG137-12 Industrial Engines Oxygen Level - Test
3500 and 3500B Engines Electronic Modular Control Panel 4 (EMCP 4)
C32 Generator Set Electronic Modular Control Panel 3 (EMCP 3)
C32 Generator Set Fuel System - Prime
UPSB505 Uninterruptible Power Supply General Information