Modulating Valve (Torque Converter Lockup Clutch)
Show/hide table
图 1 | g02727804 |
Show/hide table
244-3114 调节阀总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 218-2373 螺母     | 将蓝色 Loctite 242 涂抹在螺纹上。     |
拧紧至扭矩为 13.0 ± 1.5 N·m (115.1 ± 13.3 lb in)。 |
|||
2     | 1     | 244-3116 阀芯组件 (1)     | 拧紧至扭矩为 50 ± 5 N·m (37 ± 4 lb ft)。     |
3     | 1     | 6V-3965 接头     | 拧紧至扭矩为 14 ± 4 N·m (124 ± 35 lb in)。     |
4     | 1     | 118-3731 弹簧 (1)     | 在试验力下的长度为 14.00 mm (0.551 in)。     |
试验力为 36.0 ± 1.8 N (8.1 ± 0.4 lb)。 |
|||
试验后的自由长度为 15.99 mm (0.630 in)。 |
|||
5     | 1     | 323-9531 线圈     | 工作电压为 24 VDC。     |
温度为 25 °C (77 °F) 时的电阻为 8.7 ± 0.4 欧姆。 |
Show/hide table
( 1 ) | 不单独维修的零件。 |
Show/hide table
图 2 | g02727805 |
阀组件 |
Show/hide table
244-3114 调节阀总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
6     | 1     | 238-5080 O 形密封圈     | 用少量密封的润滑剂进行润滑。     |
7     | 1     | 317-0810 O 形密封圈     | 用少量密封的润滑剂进行润滑。     |
8     | 1     | 300-5898 阀芯组件 (1)     | 将绿色 Loctite 固定胶 620 涂抹在螺纹上。     |
拧紧至扭矩为 16 ± 2 N·m (142 ± 18 lb in)。 |
|||
9     | 1     | 160-7974 调整螺钉 (1)     | 将绿色 Loctite 固定胶 620 涂抹在螺纹上。     |
拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)。 |
|||
10     | 1     | 135-5440 节流孔 (1)     | 将绿色 Loctite 固定胶 620 涂抹在螺纹上。     |
拧紧至扭矩为 2.0 至 2.5 N·m (18.0 至 22.1 lb in)。 |
Show/hide table
( 1 ) | 不单独维修的零件 |
Caterpillar Information System:
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715} Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
C7.1-XQ230 Rental Generator Set Turbocharger - Inspect
3600 Distillate Fuel Engines Fluid Recommendations
CG137-08 and CG137-12 Industrial Engines Catalytic Converter Pressure - Test
3516C Locomotive Engines Aftercooler - Remove and Install
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Diesel Particulate Filter - Clean/Replace
826K Landfill Compactor Diesel Particulate Filter - Clean - Emission Related Component
C6.6 Industrial Engine Maintenance Interval Schedule
2011/02/02 New Software is Now Used on Current Production C9, C11, C13, C15, C18, and Certain C27 Industrial Engines {1901, 1920}
Reconditioning Dimensions for Carrier Rollers {4154, 4180} Reconditioning Dimensions for Carrier Rollers {4154, 4180}
3600 Distillate Fuel Engines Metal Particle Detector - Inspect/Clean
3600 Distillate Fuel Engines Exhaust Piping - Check
CG137-08 and CG137-12 Industrial Engines Catalytic Converter Has High Differential Temperature
CG137-08 and CG137-12 Industrial Engines Catalytic Converter Has High Inlet Temperature
CG137-08 and CG137-12 Industrial Engines Exhaust Bypass Valve
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Operator Controls
UPSB505 Uninterruptible Power Supply UPS Personalization
3516C and C175-16 Engines Selective Catalytic Reduction Diagnostic Trouble Codes
3516C Locomotive Engines Auxiliary Water Pump - Remove
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056} Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Filtration Procedure for Kidney Looping Off-Highway Truck Steering Oil {0680, 4300, 4332, 5050, 7542} Filtration Procedure for Kidney Looping Off-Highway Truck Steering Oil {0680, 4300, 4332, 5050, 7542}
3612 and 3616 Fast Vessel Engines Maintenance Interval Schedule
3516C Locomotive Engines Auxiliary Water Pump - Install
3612 and 3616 Fast Vessel Engines Maintenance Interval Schedule