Ripper Lift Cylinder
Show/hide table
| |
| Illustration 1 | g03597699 |
Show/hide table
| Specifications for 326-2227 Ripper Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 2K-0512 Locknut | Before assembly, lubricate the threads.
Torque to |
| A | 1 | 329-5113 Cylinder As | Bore is |
| B | 1 | 329-5116 Rod As | Diameter is |
| 2 | 1 | 266-9967 Head | Bore (C) over four lands is |
| Lubricate the threads with clean grease.
Torque to |
|||
| 3 | 1 | 332-6141 Bushing | Bore before assembly is |
| 4 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
| 5 | 1 | 167-2183 Buffer Seal As | Lubricate lightly with the lubricant that is being sealed. |
| 6 | 1 | 167-2303 U-Cup Seal | Lubricate lightly with the lubricant that is being sealed. |
| 7 | 1 | 233-0619 Wiper Seal | Lubricate lightly with the lubricant that is being sealed. |
Caterpillar Information System:
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Graphic Color Codes
C27 and C32 Tier 4 Engines Injector Solenoid - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Hydraulic Tank (Brake, Hoist, Steering) - Remove and Install
C27 and C32 Tier 4 Engines Pressure Sensor - Calibrate
C27 and C32 Tier 4 Engines Acceleration Is Poor or Throttle Response Is Poor
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100} Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
325 VM and VH Variable Gauge Undercarriage Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
C18 Marine Engine Maintenance Recommendations
C18 Marine Generator Set Maintenance Recommendations
2010/05/31 Improvements Have Been Made to Remanufactured Fuel Injectors on C15 and 3406E Engines {1251, 1290}
2010/06/10 Improvements Have Been Made to Remanufactured Fuel Injectors on C15 and 3406E Engines {1251, 1290}
G3304B and G3306B Engines Catalytic Converter
C27 and C32 Tier 4 Engines Sensor Signal (PWM) - Test
12M, 140M and 160M Motor Graders Hydraulic and Steering System Blade Lift Cylinder
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C27 and C32 Tier 4 Engines Electrical Power Supply - Test
3512C SR4B Generator Sets Model View Illustrations
325 VM and VH Variable Gauge Undercarriage Recoil Spring - Disassemble
325 VM and VH Variable Gauge Undercarriage Recoil Spring - Assemble
C27 and C32 Tier 4 Engines Data Link - Test
C175 Generator Sets Battery - Replace
Reassembly of the Throttle Body for Certain G3516B Engines{1265} Reassembly of the Throttle Body for Certain G3516B Engines{1265}
C175 Generator Sets Control Panel - Inspect/Test
C175 Generator Sets Coolant (DEAC) - Change