New High Temperature Hardware Is Available for Exhaust Elbow Support Brackets on 3508B and 3512B Locomotive Engines {1059, 1061}
- Engine:
- 3508B (S/N: 5PS1-UP)
- 3512B (S/N: PWG1-UP; 3ZW1-UP)
Show/hide table
Illustration 1 | g02156005 |
(1) 5P-8880 High Temperature Bolt (2) 272-1777 Hard Washer (3) 5M-2894 Hard Washer (4) Support bracket for exhaust elbow |
New bolts (1) and spacers (2) which can withstand high temperatures are available for certain 3508B and 3512B locomotive engines. These bolts and spacers are heat treated, in order to keep the hardware from loosening in high temperature applications.
Refer to Table 1 for the parts that are needed. The new hardware is a direct replacement for the current hardware.
Show/hide table
Parts List     | ||
New Part Number     | Description     | Former Part Number     |
5P-8880     | High Temperature Bolt     | 1A-2029     |
272-1777     | Hard Washer     | N/A     |
5M-2894 (1)     | Hard Washer     | N/A     |
Show/hide table
( 1 ) | This washer can be reused. |
Caterpillar Information System:
C9.3 Tier 4 Final Engines Exhaust Manifold
C4.4 Industrial Engine Flexible Exhaust Pipe
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155} Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
C7.1 Industrial Engine Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine Air Compressor - Remove and Install - Twin Cylinder Compressor
C7.1 Industrial Engine Air Compressor - Remove and Install - Single Cylinder
C7.1 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C7.1 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C4.4 Industrial Engine Crankshaft
349F and 352F Excavators Machine System Pilot Valve (Swing Parking Brake)
3500 Petroleum Engines and Petroleum Generator Sets Safety Messages
C15 Generator Sets Generator Start-up Checklist
349F and 352F Excavators Bucket - Remove and Install
C7.1 Industrial Engine and Generator Set Engine Vibration Is Excessive
Individual Clutch Modulation (ICM) Control Valves{3065, 3139} Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
C27 and C32 Tier 4 Engines Coolant Level - Test
C27 and C32 Tier 4 Engines Data Link Configuration Status - Test
G3516 TA Engine Gas Pressure
G3500B Engines Gas Pressure Regulator
C18 Marine Engine Safety Messages
C27 and C32 Tier 4 Engines Fuel Filter Differential Pressure - Test
3176C and 3196 Marine Engines Fire Prevention and Explosion Prevention
C18 Marine Engine Engine Electronics
C18 Marine Engine Model View Illustrations